CELANEX J600|PBT-(GF+P)40|Ticona物性表报告及物性特性介绍,CELANEX J600|PBT-(GF+P)40|Ticona注塑参数详情-塑料物性表查询网

Product TextsCelanex J-600 is a 40% glass/mineral reinforced resin providingCelanex J-600 is particularly suited to applications

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	18	cm³/10min	ISO 1133
温度(Temperature)	265	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	11000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	95	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2.1	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	38	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	40	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	6.5	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	6.5	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	225	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	190	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (8.00 MPa)	80	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	205	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	20	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	68	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8	mm	IEC 60695-11-10
Oxygen index	22	%	ISO 4589-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	5.1	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	4.4	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	100	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	220	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
电气强度(Electric strength)	35	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	350	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.4	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1620	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	55	cm³/g	ISO 307, 1157, 1628

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Processing conditions acc. ISO	7790	-	ISO ....-2
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	82	°C	ISO 10724
Injection Molding, injection velocity	300	mm/s	ISO 294
Injection Molding, pressure at hold	48	MPa	ISO 294

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesLubricantsRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .