Armlen PP-2FR|PP|Polyplastic物性表报告及物性特性介绍,Armlen PP-2FR|PP|Polyplastic注塑参数详情-塑料物性表查询网

Product Texts鈥婽he data for this material was provided by Plastinfo.ru.

娴佸彉鎬ц兘(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鐔斾綋浣撶Н娴佸姩閫熺巼(Melt volume-flow rate) (MVR)	10	cm鲁/10min	ISO 1133
娓╁害(Temperature)	230	掳C	ISO 1133
璐熻浇(Load)	2.16	kg	ISO 1133
鎴愬瀷鏀剁缉(Molding shrinkage) (parallel)	0.9	%	ISO 294-4, 2577
鎴愬瀷鏀剁缉(Molding shrinkage) (normal)	1.0	%	ISO 294-4, 2577

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
灞堟湇搴斿姏(Yield stress)	34	MPa	ISO 527-1/-2
灞堟湇搴斿彉(Yield strain)	7	%	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Stress at break)	15	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break)	45	%	ISO 527-1/-2
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (+23掳C)	60	kJ/m虏	ISO 179/1eU
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23掳C)	6.5	kJ/m虏	ISO 179/1eA
寮洸寮规€фā閲?Flexural modulus) (23掳C)	1650	MPa	ISO 178

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)	65	掳C	ISO 75-1/-2
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (0.45 MPa)	103	掳C	ISO 75-1/-2
燃烧性厚度(Burning behav. at thickness h)	V-2	class	IEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)	2.0	mm	IEC 60695-11-10

鍏朵粬灞炴€?Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
瀵嗗害(Density)	980	kg/m鲁	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formBulk Molding Compound, Natural ColorAdditivesFlame retarding agentSpecial CharacteristicsFlame retardantChemical ResistanceAcid Resistance, Alkali Resistance, General Chemical Resistance, Solvent Resistance, Oil Resistance, Oxidation ResistanceApplicationsAutomotive, Building Construction, Electrical and ElectronicalRegional AvailabilityEuropeDisclaimerCopyright M-Base .