Armlen PP GF 20-1EX|PP-GF20|Polyplastic物性表报告及物性特性介绍,Armlen PP GF 20-1EX|PP-GF20|Polyplastic注塑参数详情-塑料物性表查询网

Armlen PP GF 20-1EX|PP-GF20|Polyplastic

Product TextsThe data for this material was provided by Plastinfo.ru.

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	0.7	cm³/10min	ISO 1133
温度(Temperature)	230	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.4	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.6	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
破坏时应变(Stress at break)	52	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	7.5	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	65	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	22	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	3200	MPa	ISO 178

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	112	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	30	E-6/K	ISO 11359-1/-2

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
密度(Density)	1050	kg/m³	ISO 1183

CharacteristicsProcessingProfile Extrusion, Pipe/Tube ExtrusionDelivery formNatural ColorChemical ResistanceAcid Resistance, Alkali Resistance, General Chemical Resistance, Oxidation ResistanceApplicationsBuilding Construction, General PurposeRegional AvailabilityEuropeDisclaimerCopyright M-Base .

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-85733.html

免责声明: 本文 Armlen PP GF 20-1EX|PP-GF20|Polyplastic 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络