FORTRON 4184L6|PPS-(GF+MD)53|Ticona物性表报告及物性特性介绍,FORTRON 4184L6|PPS-(GF+MD)53|Ticona注塑参数详情-塑料物性表查询网

Product TextsFortron 4184L6 is an easier flow version of Fortron 4184L4. It offersThis grade is especially usedApplications made of this grade are typically

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	16600	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	165	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	1.4	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	29	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	29	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	7	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	7	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	280	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	90	°C	ISO 11357-1/-2
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	270	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (8.00 MPa)	215	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	24	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	32	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5	mm	IEC 60695-11-10
燃烧性(球压痕硬度(Burning behav)). at thickness h	V-0	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8	mm	IEC 60695-11-10

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (1MHz)	4.7	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	20	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
电气强度(Electric strength)	27	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	150	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.02	%	Sim. to ISO 62
密度(Density)	1800	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
规格的热容融化(Spec. heat capacity of melt)	1500	J/(kg K)	-

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING A shut-off All mold cavities must DisclaimerCopyright M-Base .