Akulon® Fuel Lock FL-LP|PA6|DSM物性表报告及物性特性介绍,Akulon® Fuel Lock FL-LP|PA6|DSM注塑参数详情-塑料物性表查询网

Akulon® Fuel Lock FL-LP|PA6|DSM

Akulon® Fuel Lock FL-LP|PA6|DSM 物性表: Akulon® Fuel Lock FL-LP|PA6|DSM物性表及特性介绍,Akulon® Fuel Lock FL-LP|PA6|DSM注塑参数详情,如需Akulon® Fuel Lock FL-LP|PA6|DSM下载, 可到相关下载区下载

Product TextsLow fuel permeation PA6 suitable for use in injection molding/welding of small engine fuel tanks, UV Stabilized of deflection under load (1.80 MPa)	50 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	130 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	120 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	120 / *	E-6/K	ISO 11359-1/-2

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	7 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	2.5 / *	%	Sim. to ISO 62
密度(Density)	1070 / -	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	869	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.22	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2740	J/(kg K)	-
Eff. thermal diffusivity	9.37E-8	m²/s	-

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesRelease agentRegional AvailabilityNorth America, Europe, Asia PacificOther text informationInjection moldingInjection Molding RecommendationsDisclaimerCopyright M-Base .
[/td][/tr][/table]

关键词:
PA6
DSM
Akulon® Fuel Lock FL-LP

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-91936.html

免责声明: 本文 Akulon® Fuel Lock FL-LP|PA6|DSM 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络