BERGAMID® B70G45|PA6-GF45|PolyOne物性表报告及物性特性介绍,BERGAMID® B70G45|PA6-GF45|PolyOne注塑参数详情-塑料物性表查询网

Product TextsBERGAMID B70G45, PA6 reinforced5	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	100 / 110	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	90 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	21 / 30	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	17 / -	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	223 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	213 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	220 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	14 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	55 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8 / *	mm	IEC 60695-11-10

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (1MHz)	3.9 / 6.5	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	180 / 1800	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
电气强度(Electric strength)	90 / 80	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	- / 500	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	5.2 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	1.7 / *	%	Sim. to ISO 62
密度(Density)	1510 / -	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	150 / *	cm³/g	ISO 307, 1157, 1628

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	270	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724

CharacteristicsProcessingInjection MoldingDelivery formPelletsRegional AvailabilityEuropeOther text informationInjection moldingPREPROCESSING Water Content0,1% ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130°C)[/td][/tr][tr][td] .
[/td][/tr][/table]