Durethan庐 BKV 130 H2.0|PA6-GF30|LANXESS物性表报告及物性特性介绍,Durethan庐 BKV 130 H2.0|PA6-GF30|LANXESS注塑参数详情-塑料物性表查询网

0 | PA6-GF30 |LANXESS Product TextsPA 6-Copolymer, 30 % glass fibres, injection moulding, impact modified, heat-ageing stabilized

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鎷変几妯￠噺(Tensile Modulus)	9200 / 5100	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Stress at break)	160 / 100	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break)	3 / 8	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 4200	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 3300	MPa	ISO 899-1
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (+23掳C)	85 / 90	kJ/m虏	ISO 179/1eU
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (-30掳C)	70 / 75	kJ/m虏	ISO 179/1eU
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23掳C)	18 / 25	kJ/m虏	ISO 179/1eA
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (-30掳C)	10 / 10	kJ/m虏	ISO 179/1eA
Puncture - maximum force (+23掳C)	1000 / -	N	ISO 6603-2
Puncture - maximum force (-30掳C)	840 / -	N	ISO 6603-2
Puncture energy (+23掳C)	9 / 17	J	ISO 6603-2
Puncture energy (-30掳C)	6 / 6	J	ISO 6603-2

鐑€ц兘(鐑€ц兘(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐔斿寲娓╁害(鐔斿寲娓╁害(Melting temperature)) (10掳C/min)	213 / *	掳C	ISO 11357-1/-3
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)	200 / *	掳C	ISO 75-1/-2
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (0.45 MPa)	210 / *	掳C	ISO 75-1/-2
Vicat softening temperature (50掳C/h 50N)	200 / *	掳C	ISO 306
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (parallel)	20 / *	E-6/K	ISO 11359-1/-2
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (normal)	90 / *	E-6/K	ISO 11359-1/-2
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
Oxygen index	22 / *	%	ISO 4589-1/-2

鐢垫皵鎬ц兘(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐩稿浠嬬數甯告暟(Relative permittivity) (100Hz)	4 / 10	-	IEC 60250
鐩稿浠嬬數甯告暟(Relative permittivity) (1MHz)	4 / 5	-	IEC 60250
浣撶Н鐢甸樆鐜?Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
琛ㄩ潰鐢甸樆鐜?Surface resistivity)	* / 1E12	Ohm	IEC 60093
鐢垫皵寮哄害(Electric strength)	40 / 35	kV/mm	IEC 60243-1

鍏朵粬灞炴€?Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鍚告按鐜?Water absorption)	7 / *	%	Sim. to ISO 62
鍚告箍鎬?Humidity absorption)	2 / *	%	Sim. to ISO 62
瀵嗗害(Density)	1360 / -	kg/m鲁	ISO 1183

鏉愭枡鐗规畩鎬ц兘(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
绮樻暟(Viscosity number)	134 / *	cm鲁/g	ISO 307, 1157, 1628

娴佸彉璁＄畻灞炴€?Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
瀵嗗害(Density) of melt	1160	kg/m鲁	-
鐔斾綋鐑鐜?Thermal conductivity of melt)	0.224	W/(m K)	-
瑙勬牸鐨勭儹瀹硅瀺鍖?Spec. heat capacity of melt)	2120	J/(kg K)	-
Eff. thermal diffusivity	9.13E-8	m虏/s	-
鍠峰皠娓╁害(Ejection temperature)	140	掳C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
Injection Molding, melt temperature	280	掳C	ISO 294
Injection Molding, mold temperature	80	掳C	ISO 10724

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING Water content: 0.1 % .