Orgalloy® LT 5050ES noir|PA6...|ARKEMA物性表报告及物性特性介绍,Orgalloy® LT 5050ES noir|PA6...|ARKEMA注塑参数详情-塑料物性表查询网

.. \|ARKEMA Product TextsDemonstrate a 5 / *	cm³/10min	ISO 1133
温度(Temperature)	235 / *	°C	ISO 1133
负载(Load)	5 / *	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	- / 460	MPa	ISO 527-1/-2
Stress at 50% strain	- / 23	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	- / >50	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 420	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 270	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	N / N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	80 / 82	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
维卡软化温度（50℃/ h的50N）Vicat softening temperature	73 / *	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	170 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	180 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	3.2 / *	mm	IEC 60695-11-10

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	- / 4	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	- / 4	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	- / 1100	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	- / 500	E-4	IEC 60250
体积电阻率(Volume resistivity)	- / 7.50E11	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / >1E15	Ohm	IEC 60093
电气强度(Electric strength)	36 / 36	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	* / 600	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1040 / 1040	kg/m³	ISO 1183

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	60	°C	ISO 10724

CharacteristicsProcessingFilm Extrusion, Profile Extrusion, Sheet Extrusion, Other Extrusion, Blow Molding, CalanderingDelivery formPelletsSpecial CharacteristicsPlatable, Light stabilized or stable to light, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaChemical Media Resistance

Acids