Ultramid® B3WGM24 BK30564|PA6-(GF+MD)30|BASF物性表报告及物性特性介绍,Ultramid® B3WGM24 BK30564|PA6-(GF+MD)30|BASF注塑参数详情-塑料物性表查询网

Product TextsGlass-fibre and mineral reinforced heat stabilized injection moulding grade for industrial articles having medium to high rigidity and high dimensional stability, used e.g. for automobile engine covers, housings and automotive door handles.[table]
机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	9300 / 4200	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	120 / 55	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3 / 10	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	52 / 60	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	50 / 45	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	7 / 13	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	5 / 5	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	195 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	215 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	38 / *	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (1MHz)	3.9 / 6.2	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	200 / 2000	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
相比漏电起痕指数(Comparative tracking index)	- / 400	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	7.2 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	2.3 / *	%	Sim. to ISO 62
密度(Density)	1370 / -	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	140 / *	cm³/g	ISO 307, 1157, 1628

Diagrams Water content: 0.10%If drying Drying time is Packing pressure affects It should be applied and maintained Minimal back pressure should beSurface Chemical Media Resistance

Acids

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)