Makrolon® GF9002|PC-GF10|Bayer MatSc物性表报告及物性特性介绍,Makrolon® GF9002|PC-GF10|Bayer MatSc注塑参数详情-塑料物性表查询网

Product TextsMVR (300 °C/1.2 kg) 15 cm3/10 min10 % glass fiber reinforcedchlorine- and bromine-free flame retardancyUL 94V-0/1.2 mmlow viscosityeasy releaseavailable in opaque colors onlyelectrical/electronichousing parts with low wall thickness

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	15	cm³/10min	ISO 1133
温度(Temperature)	300	°C	ISO 1133
负载(Load)	1.2	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.5	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	3900	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	45	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	10	%	ISO 527-1/-2
Puncture - maximum force (+23°C)	3200	N	ISO 6603-2
Puncture energy (+23°C)	16	J	ISO 6603-2

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
维卡软化温度（50℃/ h的50N）Vicat softening temperature	141	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	40	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	60	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at thickness h	V-0	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.2	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
Oxygen index	35	%	ISO 4589-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.2	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.2	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	10	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	90	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
电气强度(Electric strength)	36	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	175	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.26	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.1	%	Sim. to ISO 62
密度(Density)	1270	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1080	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.252	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2100	J/(kg K)	-
Eff. thermal diffusivity	1.11E-7	m²/s	-
喷射温度(Ejection temperature)	140	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	300	°C	ISO 294
Injection Molding, mold temperature	110	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

Diagrams Water content: 0.02 % .