Xenoy X2500UV|(PC+PET)|沙特基础物性表报告及物性特性介绍,Xenoy X2500UV|(PC+PET)|沙特基础注塑参数详情-塑料物性表查询网

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	9	g/10min	ASTM D 1238
温度(Temperature)	265	°C	-
负载(Load)	2.16	kg	-
模具收缩(Mold Shrinkage) (MD)	0.0065	mm/mm	ASTM D 955
密度(Density) (73°F)	1210	kg/m³	ASTM D 792

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	4	cm³/10min	ISO 1133
温度(Temperature)	265	°C	ISO 1133
负载(Load)	1.2	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	2200	MPa	ISO 527-1/-2
屈服应力(Yield stress)	57	MPa	ISO 527-1/-2
屈服应变(Yield strain)	5	%	ISO 527-1/-2
破坏时应变(Stress at break)	56	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	>50	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (-30°C)	N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	50	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	30	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	2150	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	40	kJ/m²	ISO 180/1A
悬臂梁式冲击切口	25	kJ/m²	ISO 180/1A
温度(Temperature)	-30	°C	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	N	kJ/m²	ISO 180/1U
球压痕硬度(Ball indentation hardness)	95	MPa	ISO 2039-1
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	2200	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Yield	56	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	55	MPa	ASTM D 638
屈服伸长率(Elongation at Yield)	5	%	ASTM D 638
断裂伸长率(Elongation at Break)	80	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	2100	MPa	ASTM D 790
抗弯强度(Flexural Strength)	79	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.6	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	0.2	kJ/m	ASTM D 256
温度(Temperature)	-30	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	108	°C	ISO 75-1/-2
Vicat softening temperature A	145	°C	ISO 306
维卡软化温度（50℃/ h的50N）Vicat softening temperature	135	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	82	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	87	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	1.5	mm	-
DTUL @ 264 psi	108	°C	ASTM D 648
Vicat 温度(Temperature)	135	°C	ASTM D 1525

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)	3.1	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	0.02	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
电气强度(Electric strength)	17	kV/mm	IEC 60243-1

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	0.7	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1210	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsHigh impact or impact modified, Heat stabilized or stable to heatRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base .