Bergaflex庐 BFI 60A-3114|TPS|PolyOne物性表报告及物性特性介绍,Bergaflex庐 BFI 60A-3114|TPS|PolyOne注塑参数详情-塑料物性表查询网

Bergaflex庐 BFI 60A-3114|TPS|PolyOne

Bergaflex庐 BFI 60A-3114|TPS|PolyOne 物性表: Bergaflex庐 BFI 60A-3114|TPS|PolyOne物性表及特性介绍,Bergaflex庐 BFI 60A-3114|TPS|PolyOne注塑参数详情,如需Bergaflex庐 BFI 60A-3114|TPS|PolyOne下载, 可到相关下载区下载

Product TextsBergaflex 60A-3114, TPE-S, SEBS5	MPa	ISO 527-1/-2
Stress at 300% elongation	3.8	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break) TPE	>300	%	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Stress at break) TPE	5.4	MPa	ISO 527-1/-2
鍘嬬缉璁剧疆涓嬬殑鎭掑簲鍙?Compression Set under constant strain) (23掳C)	16	%	ISO 815
鍘嬬缉璁剧疆涓嬬殑鎭掑簲鍙?Compression Set under constant strain) (70掳C)	88	%	ISO 815
鍘嬬缉璁剧疆涓嬬殑鎭掑簲鍙?Compression Set under constant strain) (100掳C)	93	%	ISO 815
閭靛皵A纭害(Shore A hardness) (3s)	60	-	ISO 868

鍏朵粬灞炴€?Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
瀵嗗害(Density)	890	kg/m鲁	ISO 1183

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
Injection Molding, melt temperature	170	掳C	ISO 294
Injection Molding, mold temperature	30	掳C	ISO 10724

CharacteristicsProcessingInjection Molding, Film Extrusion, Profile Extrusion, Other Extrusion, Blow Molding, CalanderingDelivery formPelletsSpecial CharacteristicsU.V. stabilized or stable to weatherRegional AvailabilityEuropeDisclaimerCopyright M-Base .
[/td][/tr][/table]

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-99387.html

免责声明: 本文 Bergaflex庐 BFI 60A-3114|TPS|PolyOne 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络