- 熔体流动速率 [g/10min]: 10.0
- 密度 [g/cm3]: 0.94
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.940 g/cc | 0.0340 lb/in³ | ASTM D792 |
| Viscosity | 1.00e+6 cP @Shear Rate 50.0 1/s, Temperature 190 °C | 1.00e+6 cP @Shear Rate 50.0 1/s, Temperature 374 °F | estimated from log-log graph |
| Melt Flow | 10 g/10 min @Load 2.16 kg, Temperature 190 °C | 10 g/10 min @Load 4.76 lb, Temperature 374 °F | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Seal Strength | 1500 g/25 mm | 1500 g/in | PP, bar temp 150-175°C |
| 4000 g/25 mm | 4000 g/in | HDPE, bar temp 150-175°C | |
| Thermal Properties | Metric | English | Comments |
| Melting Point | 65.0 °C | 149 °F | Freezing Point via DSC/ASTM D3418 |
| 85.0 °C | 185 °F | Upon Melting via DSC/ASTM D3418 | |
| Vicat Softening Point | 53.0 °C | 127 °F | ASTM D1525 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 275 °C | 527 °F | Typical extrusion metering zone. May be extruded up to 300°C. |
| Nozzle Temperature | 275 °C | 527 °F | Die |