Arkema Group Plexiglas® DR® M2 Acrylic物性表参数

Arkema Group Plexiglas® DR® M2 Acrylic

Arkema Group Plexiglas® DR® M2 Acrylic 物性表: Arkema Group Plexiglas® DR® M2 Acrylic物性表及特性介绍,Arkema Group Plexiglas® DR® M2 Acrylic注塑参数详情,如需Arkema Group Plexiglas® DR® M2 Acrylic下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 1.0
缺口冲击强度: 0.427
透光率 [%]: 88.0

Physical Properties	Metric	English	Comments

Specific Gravity	1.15 g/cc	1.15 g/cc	ASTM D792
Melt Flow	1.0 g/10 min @Load 3.80 kg, Temperature 230 °C	1.0 g/10 min @Load 8.38 lb, Temperature 446 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Izod Impact, Notched	0.427 J/cm	0.800 ft-lb/in	ASTM D256

Optical Properties	Metric	English	Comments
Haze	2.5 % @Thickness 3.17 mm	2.5 % @Thickness 0.125 in	ASTM D1003
Transmission, Visible	88 % @Thickness 3.17 mm	88 % @Thickness 0.125 in	ASTM D1003

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-29861.html

免责声明: 本文 Arkema Group Plexiglas® DR® M2 Acrylic 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息