Asahi Kasei Delpet® 80N Acrylic Molding Compound, High Heat Grade

Asahi Kasei Delpet® 80N Acrylic Molding Compound, High Heat Grade 物性表: Asahi Kasei Delpet® 80N Acrylic Molding Compound, High Heat Grade物性表及特性介绍,Asahi Kasei Delpet® 80N Acrylic Molding Compound, High Heat Grade注塑参数详情,如需Asahi Kasei Delpet® 80N Acrylic Molding Compound, High Heat Grade下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 0.9
  • 密度 [g/cm3]: 1.19
  • 吸水率 [%]: 0.3
  • 断裂伸长率 [%]: 120
  • 弯曲强度 [MPa]: 73.0
  • 弯曲模量 [MPa]: 3.30
  • 透光率 [%]: 93.0
 
Physical PropertiesMetricEnglishComments
Density 1.19 g/cc0.0430 lb/in³ASTM D792
Water Absorption 0.30 %0.30 %details not reported; ASTM D792
Linear Mold Shrinkage 0.0020 - 0.0060 cm/cm0.0020 - 0.0060 in/inASTM D955
Melt Flow 0.90 g/10 min0.90 g/10 minCondition L; ASTM D1238
 2.0 g/10 min2.0 g/10 minCondition I; ASTM D1238
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 100100ASTM D785
Tensile Strength, Ultimate 73.0 MPa10600 psiASTM D638
Elongation at Break 5.0 %5.0 %ASTM D638
Flexural Yield Strength 120 MPa17400 psiASTM D790
Flexural Modulus 3.30 GPa479 ksiASTM D790
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity >= 1.00e+15 ohm-cm>= 1.00e+15 ohm-cmASTM D257
Surface Resistance >= 1.00e+16 ohm>= 1.00e+16 ohmASTM D257
Dielectric Constant  3.0
@Frequency 40.0 - 50.0 Hz
3.0
@Frequency 40.0 - 50.0 Hz
ASTM D150
 4.0
@Frequency 60 Hz
4.0
@Frequency 60 Hz
ASTM D150
Dielectric Strength 20.0 kV/mm508 kV/inShort-term; 4 kV/s; ASTM D149
Dissipation Factor  0.020
@Frequency 40.0 Hz
0.020
@Frequency 40.0 Hz
ASTM D150
 0.040
@Frequency 50 Hz
0.040
@Frequency 50 Hz
ASTM D150
 0.060
@Frequency 60 Hz
0.060
@Frequency 60 Hz
ASTM D150
 
Thermal PropertiesMetricEnglishComments
CTE, linear 60.0 µm/m-°C
@Temperature 20.0 °C
33.3 µin/in-°F
@Temperature 68.0 °F
ASTM D257
Specific Heat Capacity 1.46 J/g-°C0.349 BTU/lb-°F
Thermal Conductivity 0.210 W/m-K1.46 BTU-in/hr-ft²-°FASTM C177
Maximum Service Temperature, Air 100 °C212 °FHeat Distortion Temp
 100 °C212 °FDeflection Temp; Load not reported; ASTM D648
 
Optical PropertiesMetricEnglishComments
Refractive Index 1.491.49
Transmission, Visible 93 %93 %ASTM D1003

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-30208.html

免责声明: 本文 Asahi Kasei Delpet® 80N Acrylic Molding Compound, High Heat Grade 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4