- 熔体流动速率 [g/10min]: 4.8
- 吸水率 [%]: 0.1
- 缺口冲击强度: 0.2
- 弯曲强度 [MPa]: 36.0
- 弯曲模量 [MPa]: 2.17
- 硬度: 76.0
- 透光率 [%]: 89.2
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.05 g/cc | 1.05 g/cc | ASTM D792 | ||
| Water Absorption | 0.10 % | 0.10 % | 24 hr.; ASTM D570 | ||
| Linear Mold Shrinkage | 0.0020 - 0.0060 cm/cm | 0.0020 - 0.0060 in/in | ASTM D955 | ||
| Melt Flow | 4.8 g/10 min @Load 5.00 kg, Temperature 200 °C | 4.8 g/10 min @Load 11.0 lb, Temperature 392 °F | ASTM D1238 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell R | 76 | 76 | ASTM D785 | ||
| Tensile Strength, Ultimate | 36.0 MPa | 5220 psi | ASTM D638 | ||
| Elongation at Break | 40 % | 40 % | ASTM D638 | ||
| Tensile Modulus | 2.28 GPa | 331 ksi | ASTM D638 | ||
| Flexural Strength | 57.0 MPa | 8270 psi | ASTM D790 | ||
| Flexural Modulus | 2.17 GPa | 315 ksi | ASTM D790 | ||
| Izod Impact, Notched | 0.200 J/cm | 0.375 ft-lb/in | ASTM D256 | ||
| Izod Impact, Unnotched | 1.60 J/cm | 3.00 ft-lb/in | ASTM D256 | ||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 87.0 °C | 189 °F | ASTM D648 | ||
| Vicat Softening Point | 99.0 °C | 210 °F | ASTM D1525 | ||
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | all colors | ||
| Optical Properties | Metric | English | Comments | ||
| Refractive Index | 1.57 | 1.57 | ASTM D542 | ||
| Haze | 1.0 % | 1.0 % | ASTM D1003 | ||
| Transmission, Visible | 89.2 % | 89.2 % | ASTM D1003 | ||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | <= 250 °C | <= 482 °F | |||
| Rear Barrel Temperature | 179 - 213 °C | 354 - 415 °F | |||
| Middle Barrel Temperature | 185 - 218 °C | 365 - 424 °F | |||
| Front Barrel Temperature | 191 - 224 °C | 376 - 435 °F | |||
| Melt Temperature | 204 - 238 °C | 399 - 460 °F | |||
| Mold Temperature | 27.0 - 54.0 °C | 80.6 - 129 °F | |||
| Back Pressure | 0.689 MPa | 100 psi | |||
| Descriptive Properties | |||||
| Injection Speed | moderate-fast | ||||
| Pre-Dry Requirements | 2 hrs. at 65°C | ||||
Materials flagged as discontinued () are no longer part of the manufacturer’s standard product line according to our latest information. These materials may be available by special order, in distribution inventory, or reinstated as an active product. Data sheets from materials that are no longer available remain in MatWeb to assist users in finding replacement materials.
Users of our Advanced Search (registration required) may exclude discontinued materials from search results.