| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 2.20 g/cc | 2.20 g/cc | ASTM D395 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 55 | 55 | ASTM D2240 | ||
| Tensile Strength | 1.21 MPa | 175 psi | ASTM D412 | ||
| Elongation at Break | 175 % | 175 % | ASTM D412 | ||
| Tensile Impact | 17.3 J/cm | 32.4 ft-lb/in | Force Deflection at 30%; ASTM D575 Modified | ||
| Compression Set | 25 % @Temperature 70.0 °C, Time 79200 sec | 25 % @Temperature 158 °F, Time 22.0 hour | ASTM D395, Method B | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 0.035 ohm-cm | 0.035 ohm-cm | Chomerics MAT-1002 | ||
| Shielding Effectiveness | <= 65 dB | <= 65 dB | Modified IEEE-299 | ||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 125 °C | 257 °F | |||
| Flammability, UL94 | V-0 | V-0 | |||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 30.0 min @Temperature 150 °C | 0.500 hour @Temperature 302 °F | Tack Free Time | ||
| 30.0 min @Temperature 150 °C | 0.500 hour @Temperature 302 °F | Handling Time | |||
| 30.0 min @Temperature 150 °C | 0.500 hour @Temperature 302 °F | Full Cure | |||
| Shelf Life | 6.00 Month @Temperature -12.0 - -8.00 °C | 6.00 Month @Temperature 10.4 - 17.6 °F | Chomerics | ||
| Descriptive Properties | |||||
| Adhesion | 12 N/cm | Trivalent Chromate Coating on Aluminum, Chomerics WI 1038 | |||
| Binder | Silicone | ||||
| Corrosion Resistance | 20 | Galvanic Resistance Against Aluminum | |||
| Cure System | Thermal | ||||
| Filler | Ni/C | ||||
| Number of Components | 1 | ||||
| Resin System | Silicone | ||||
