- 密度 [g/cm3]: 1.0
- 缺口冲击强度: 1.8
- 弯曲模量 [MPa]: 6.60
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.00 - 1.15 g/cc | 0.0361 - 0.0415 lb/in³ | ASTM D792 | ||
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | ASTM D955 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 50.0 MPa | 7250 psi | ASTM D638 | ||
| Flexural Strength | 76.0 MPa | 11000 psi | at rupture; ASTM D790 | ||
| Flexural Modulus | 6.60 GPa | 957 ksi | ASTM D790 | ||
| Compressive Strength | 210 MPa | 30500 psi | ASTM D695 | ||
| Izod Impact, Notched | 1.80 J/cm | 3.37 ft-lb/in | ASTM D256 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Constant | 1.8 @Frequency 1.00e+6 Hz | 1.8 @Frequency 1.00e+6 Hz | wet; ASTM D150 | ||
| Dielectric Strength | 14.4 kV/mm @Frequency 60.0 Hz | 366 kV/in @Frequency 60.0 Hz | step-by-step, wet; ASTM D149 | ||
| 15.2 kV/mm @Frequency 60.0 Hz | 386 kV/in @Frequency 60.0 Hz | short time, wet; ASTM D149 | |||
| Dissipation Factor | 0.030 @Frequency 1.00e+6 Hz | 0.030 @Frequency 1.00e+6 Hz | wet; ASTM D150 | ||
| Arc Resistance | 126 sec | 126 sec | ASTM D495 | ||
| Descriptive Properties | |||||
| Color | Natural | ||||
| Form | Coarse Flake | ||||
| Molding Method | Compression | ||||