Overview of materials for Melamine-Phenolic Copolymer

Overview of materials for Melamine-Phenolic Copolymer 物性表: Overview of materials for Melamine-Phenolic Copolymer物性表及特性介绍,Overview of materials for Melamine-Phenolic Copolymer注塑参数详情,如需Overview of materials for Melamine-Phenolic Copolymer下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.5
  • 吸水率 [%]: 0.22
  • 缺口冲击强度: 0.159
  • 拉伸强度 [MPa]: 40.0
  • 断裂伸长率 [%]: 70.0
  • 弯曲强度 [MPa]: 53.0
  • 弯曲模量 [MPa]: 5.00
 
Physical PropertiesMetricEnglishComments
Density 1.50 - 1.81 g/cc0.0542 - 0.0654 lb/in³Average value: 1.64 g/cc Grade Count:22
Apparent Bulk Density 0.500 - 0.800 g/cc0.0181 - 0.0289 lb/in³Average value: 0.655 g/cc Grade Count:11
Water Absorption 0.220 - 2.50 %0.220 - 2.50 %Average value: 1.18 % Grade Count:21
Linear Mold Shrinkage -0.000500 - 0.0130 cm/cm-0.000500 - 0.0130 in/inAverage value: 0.00732 cm/cm Grade Count:22
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell E 67.0 - 86.067.0 - 86.0Average value: 75.8 Grade Count:11
Tensile Strength, Ultimate 53.0 - 76.0 MPa7690 - 11000 psiAverage value: 61.7 MPa Grade Count:12
Tensile Strength, Yield 40.0 - 90.0 MPa5800 - 13100 psiAverage value: 61.0 MPa Grade Count:10
Elongation at Break 0.470 - 0.950 %0.470 - 0.950 %Average value: 0.745 % Grade Count:11
Modulus of Elasticity 5.00 - 13.3 GPa725 - 1930 ksiAverage value: 8.90 GPa Grade Count:22
Flexural Yield Strength 70.0 - 140 MPa10200 - 20300 psiAverage value: 101 MPa Grade Count:22
Flexural Modulus 5.00 - 12.5 GPa725 - 1810 ksiAverage value: 8.93 GPa Grade Count:22
Compressive Yield Strength 142 - 250 MPa20600 - 36300 psiAverage value: 194 MPa Grade Count:22
Izod Impact, Notched 0.159 - 0.215 J/cm0.298 - 0.403 ft-lb/inAverage value: 0.186 J/cm Grade Count:11
Charpy Impact Unnotched 0.450 - 1.40 J/cm²2.14 - 6.66 ft-lb/in²Average value: 0.812 J/cm² Grade Count:11
 0.400 - 0.700 J/cm²
@Temperature -40.0 - -40.0 °C
1.90 - 3.33 ft-lb/in²
@Temperature -40.0 - -40.0 °F
Average value: 0.550 J/cm² Grade Count:1
Charpy Impact, Notched 0.0180 - 0.239 J/cm²0.0857 - 1.14 ft-lb/in²Average value: 0.175 J/cm² Grade Count:22
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+11 - 1.00e+14 ohm-cm1.00e+11 - 1.00e+14 ohm-cmAverage value: 1.63e+13 ohm-cm Grade Count:22
Surface Resistance 1.00e+10 - 1.00e+12 ohm1.00e+10 - 1.00e+12 ohmAverage value: 1.04e+11 ohm Grade Count:11
Dielectric Constant 6.50 - 16.06.50 - 16.0Average value: 9.33 Grade Count:22
Dielectric Strength 4.80 - 30.0 kV/mm122 - 762 kV/inAverage value: 12.3 kV/mm Grade Count:21
Dissipation Factor 0.0300 - 0.5000.0300 - 0.500Average value: 0.160 Grade Count:22
Arc Resistance 115 - 188 sec115 - 188 secAverage value: 172 sec Grade Count:14
Comparative Tracking Index 175 - 600 V175 - 600 VAverage value: 519 V Grade Count:22
 
Thermal PropertiesMetricEnglishComments
CTE, linear 15.0 - 53.0 µm/m-°C
@Temperature 40.0 - 130 °C
8.33 - 29.4 µin/in-°F
@Temperature 104 - 266 °F
Average value: 29.6 µm/m-°C Grade Count:12
Thermal Conductivity 0.400 - 0.600 W/m-K2.78 - 4.16 BTU-in/hr-ft²-°FAverage value: 0.470 W/m-K Grade Count:10
 0.510 - 0.610 W/m-K
@Temperature 100 - 100 °C
3.54 - 4.23 BTU-in/hr-ft²-°F
@Temperature 212 - 212 °F
Average value: 0.570 W/m-K Grade Count:4
Maximum Service Temperature, Air 135 - 190 °C275 - 374 °FAverage value: 150 °C Grade Count:22
Deflection Temperature at 1.8 MPa (264 psi) 155 - 202 °C311 - 396 °FAverage value: 178 °C Grade Count:21
Deflection Temperature at 8.0 MPa 110 - 140 °C230 - 284 °FAverage value: 123 °C Grade Count:11
Flammability, UL94 V-0 - 5VBV-0 - 5VBGrade Count:21
Oxygen Index 33.0 - 36.0 %33.0 - 36.0 %Average value: 34.2 % Grade Count:5
Shrinkage 0.250 - 1.42 %0.250 - 1.42 %Average value: 0.806 % Grade Count:12
 0.800 - 2.00 %
@Temperature 110 - 110 °C
0.800 - 2.00 %
@Temperature 230 - 230 °F
Average value: 1.26 % Grade Count:10
 0.800 - 2.00 %
@Time 605000 - 605000 sec
0.800 - 2.00 %
@Time 168 - 168 hour
Average value: 1.26 % Grade Count:10
 
Processing PropertiesMetricEnglishComments
Shelf Life 6.00 Month6.00 MonthAverage value: 6.00 Month Grade Count:10

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-33161.html

免责声明: 本文 Overview of materials for Melamine-Phenolic Copolymer 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4