- 密度 [g/cm3]: 1.57
- 吸水率 [%]: 0.45
- 缺口冲击强度: 0.181
- 弯曲强度 [MPa]: 70.0
- 弯曲模量 [MPa]: 7.70
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.670 g/cc | 0.0242 lb/in³ | ASTM D1895 |
| Density | 1.57 g/cc | 0.0567 lb/in³ | ASTM D792 |
| Water Absorption | 0.45 % | 0.45 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0097 cm/cm | 0.0097 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 83 | 83 | ASTM D785 |
| Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM D638 |
| Elongation at Break | 0.95 % | 0.95 % | ASTM D638 |
| Tensile Modulus | 8.90 GPa | 1290 ksi | ASTM D638 |
| Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
| Flexural Modulus | 7.70 GPa | 1120 ksi | ASTM D790 |
| Compressive Strength | 188 MPa | 27300 psi | ASTM D695 |
| Izod Impact, Notched | 0.181 J/cm | 0.339 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.196 J/cm² | 0.933 ft-lb/in² | ASTM D256 |
| Impact | 110 | 110 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | ASTM D247 |
| Dielectric Constant | 7.6 | 7.6 | ASTM D150 |
| Dielectric Strength | 6.20 kV/mm | 157 kV/in | Step by Step; ASTM D149 |
| 9.30 kV/mm | 236 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.064 | 0.064 | ASTM D150 |
| Arc Resistance | 184 sec | 184 sec | ASTM D495 |
| Comparative Tracking Index | 600 V | 600 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 137 °C | 279 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 177 °C | 351 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 0.610 mm | V-0 @Thickness 0.0240 in | |
| Shrinkage | 1.42 % | 1.42 % | 240 hr, 105ºC; ASTM D1299 |