Raschig Group MELOPLAS® 181 MF

Raschig Group MELOPLAS® 181 MF 物性表: Raschig Group MELOPLAS® 181 MF物性表及特性介绍,Raschig Group MELOPLAS® 181 MF注塑参数详情,如需Raschig Group MELOPLAS® 181 MF下载, 可到相关下载区下载
  • 拉伸强度 [MPa]: 45.0
  • 弯曲模量 [MPa]: 7.00
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.50 - 1.70 g/cc1.50 - 1.70 g/ccISO 1183
Apparent Bulk Density 0.550 - 0.750 g/cc0.0199 - 0.0271 lb/in³ISO 60
Water Absorption <= 2.0 %
@Temperature 23.0 °C,
Time 86400 sec
<= 2.0 %
@Temperature 73.4 °F,
Time 24.0 hour
ISO 62
Linear Mold Shrinkage 0.0060 - 0.010 cm/cm0.0060 - 0.010 in/in(longitudinal) Compression; ISO 2577
 0.0090 - 0.013 cm/cm0.0090 - 0.013 in/in(longitudinal) Injection; ISO 2257
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Yield 45.0 - 65.0 MPa6530 - 9430 psiCompression; ISO 527
 60.0 - 85.0 MPa8700 - 12300 psiInjection; ISO 527
Modulus of Elasticity 5.00 - 8.00 GPa725 - 1160 ksiInjection and Compression; ISO 527
Flexural Strength 80.0 - 110 MPa11600 - 16000 psiCompression; ISO 178
 100 - 130 MPa14500 - 18900 psiInjection; ISO 178
Flexural Modulus 7.00 - 9.00 GPa1020 - 1310 ksiInjection and Compression; ISO 178
Compressive Strength 200 - 250 MPa29000 - 36300 psiISO 604
Charpy Impact Unnotched  0.500 - 0.900 J/cm²
@Temperature 23.0 °C
2.38 - 4.28 ft-lb/in²
@Temperature 73.4 °F
Compression; ISO 179/ 1eU
 0.700 - 1.10 J/cm²
@Temperature 23.0 °C
3.33 - 5.24 ft-lb/in²
@Temperature 73.4 °F
Injection; ISO 179/ 1eU
Charpy Impact, Notched  0.120 - 0.180 J/cm²
@Temperature 23.0 °C
0.571 - 0.857 ft-lb/in²
@Temperature 73.4 °F
Compression; ISO 179/ 1eA
 0.140 - 0.200 J/cm²
@Temperature 23.0 °C
0.666 - 0.952 ft-lb/in²
@Temperature 73.4 °F
Injection; ISO 179/ 1eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+11 - 1.00e+12 ohm-cm1.00e+11 - 1.00e+12 ohm-cmIEC 60093
Surface Resistance 1.00e+10 - 1.00e+11 ohm1.00e+10 - 1.00e+11 ohmIEC 60093
Dielectric Constant  7.0 - 9.0
@Frequency 1.00e+6 Hz
7.0 - 9.0
@Frequency 1.00e+6 Hz
IEC 60250
 11 - 16
@Frequency 100 Hz
11 - 16
@Frequency 100 Hz
IEC 60250
Dielectric Strength 15.0 - 20.0 kV/mm381 - 508 kV/inIEC 60243-1
Dissipation Factor  0.030 - 0.050
@Frequency 1.00e+6 Hz
0.030 - 0.050
@Frequency 1.00e+6 Hz
IEC 60250
 0.30 - 0.50
@Frequency 100 Hz
0.30 - 0.50
@Frequency 100 Hz
IEC 60250
Arc Resistance 125 - 135 sec125 - 135 secASTM D495
Comparative Tracking Index >= 250 V>= 250 VCTI; IEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear 15.0 - 35.0 µm/m-°C
@Temperature 50.0 - 100 °C
8.33 - 19.4 µin/in-°F
@Temperature 122 - 212 °F
ISO 11359-2
Thermal Conductivity 0.500 - 0.600 W/m-K3.47 - 4.16 BTU-in/hr-ft²-°FDIN 52 612
Maximum Service Temperature, Air 135 °C275 °F20,000 h; IEC 216/T1
 160 °C320 °F< 50 h; IEC 216/T1
Deflection Temperature at 1.8 MPa (264 psi) 155 - 180 °C311 - 356 °FInjection and Compression; ISO 75-A
Deflection Temperature at 8.0 MPa 110 - 130 °C230 - 266 °FInjection and Compression; ISO 75-C
Flammability, UL94 V-0
@Thickness 1.50 mm
V-0
@Thickness 0.0591 in
Shrinkage 1.0 - 1.5 %
@Temperature 110 °C,
Time 605000 sec
1.0 - 1.5 %
@Temperature 230 °F,
Time 168 hour
Post-shrinkage; ISO 2577
 
Processing PropertiesMetricEnglishComments
Shelf Life 6.00 Month
@Temperature 15.0 - 25.0 °C
6.00 Month
@Temperature 59.0 - 77.0 °F
 
Descriptive Properties
Arc resistance5 StufeASTM D495
Glow wire ignitability test900/1IEC 60695 2-13
Glow-wire flammability test960/1IEC 60695 2-12
Water Absorption<115 mgISO 62; 24h / 23°C

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-33202.html

免责声明: 本文 Raschig Group MELOPLAS® 181 MF 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4