Arlon 10502N060 0.060" (1.52 mm) Cured/Post-Cured Unsupported Silicone Rubber物性表参数

Arlon 10502N060 0.060" (1.52 mm) Cured/Post-Cured Unsupported Silicone Rubber

Arlon 10502N060 0.060" (1.52 mm) Cured/Post-Cured Unsupported Silicone Rubber 物性表: Arlon 10502N060 0.060" (1.52 mm) Cured/Post-Cured Unsupported Silicone Rubber物性表及特性介绍,Arlon 10502N060 0.060" (1.52 mm) Cured/Post-Cured Unsupported Silicone Rubber注塑参数详情,如需Arlon 10502N060 0.060" (1.52 mm) Cured/Post-Cured Unsupported Silicone Rubber下载, 可到相关下载区下载

Physical Properties	Metric	English	Comments

Thickness	76.2 microns	3.00 mil	Polyethylene Interleave
	1370 - 1680 microns	54.0 - 66.0 mil	Overall
	1370 - 1680 microns	54.0 - 66.0 mil	Side 1

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	50 - 60	50 - 60	Compound Property
Tensile Strength	7.45 - 9.10 MPa	1080 - 1320 psi	Compound Property
Elongation at Break	540 - 660 %	540 - 660 %	Compound Property
100% Modulus	>= 0.00172 GPa	>= 0.250 ksi	Compound Property
Tear Strength	>= 43.8 kN/m	>= 250 pli	Compound Property
Compression Set	<= 28 %	<= 28 %	After Post Cure, Compound Property

Electrical Properties	Metric	English	Comments
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in	Compound Property

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	232 °C	450 °F
Minimum Service Temperature, Air	-56.7 °C	-70.0 °F

Descriptive Properties
Color	Translucent
Total Product Weight (oz/yd²)	62.1 - 75.9

关键词:
供应
硅胶
Arlon 10502N060 0.060" (1.52 mm) Cured/Post-Cured Unsupported Silicone Rubber

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-33793.html

免责声明: 本文 Arlon 10502N060 0.060" (1.52 mm) Cured/Post-Cured Unsupported Silicone Rubber 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络