塑胶原料之家
  1. 首页
  2. 英文物性
  3. 硅胶
  4. Arlon 51586R015 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate

Arlon 51586R015 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate

Arlon 51586R015 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate 物性表: Arlon 51586R015 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate物性表及特性介绍,Arlon 51586R015 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate注塑参数详情,如需Arlon 51586R015 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.34
 
Physical PropertiesMetricEnglishComments
Density 1.34 g/cc0.0484 lb/in³Side 2, Silicone Property; Arlon SQA-TMS-024
 1.56 g/cc0.0564 lb/in³Side 1, Silicone Property; Arlon SQA-TMS-024
Thickness 50.8 microns2.00 milSide 1; Arlon SQA-TMS-003
 76.2 microns3.00 milInterleave
 127 microns5.00 milSide 2; Arlon SQA-TMS-003
 203 microns8.00 milSubstrate; Arlon SQA-TMS-003
 381 microns15.0 milOverall; Arlon SQA-TMS-003
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore A 3737Side 2, Silicone Property; ASTM D2240
 5555Side 1, Silicone Property; ASTM D2240
Tensile Strength 3.65 MPa530 psiSide 1, Silicone Property; ASTM D412
 6.55 MPa950 psiSide 2, Silicone Property; ASTM D412
Elongation at Break 300 %300 %Side 1, Silicone Property; ASTM D412
 620 %620 %Side 2, Silicone Property; ASTM D412
Tear Strength 7.01 kN/m40.0 pliSide 1, Silicone Property; ASTM D624
 26.3 kN/m150 pliSide 2, Silicone Property; ASTM D624
Peel Strength 2.10 kN/m12.0 pliBond Strength; ASTM D624
 
Electrical PropertiesMetricEnglishComments
Dielectric Strength 29.5 kV/mm750 kV/inASTM D149
 
Thermal PropertiesMetricEnglishComments
Maximum Service Temperature, Air 232 °C450 °F
Minimum Service Temperature, Air -56.7 °C-70.0 °F
Flammability, UL94 HB
@Temperature 200 °C		HB
@Temperature 392 °F		per card E54153
 
Processing PropertiesMetricEnglishComments
Cure Time 120 min
@Temperature 204 °C		2.00 hour
@Temperature 400 °F		Recommended Postcure Cycle
 15.0 min
@Pressure 0.345 MPa,
Temperature 177 °C		0.250 hour
@Pressure 50.0 psi,
Temperature 350 °F		Recommended Cure Cycle
Shelf Life 6.00 Month
@Temperature 23.9 °C		6.00 Month
@Temperature 75.0 °F		From date of manufacture
 
Descriptive Properties
ColorRed
Total Product Weight (oz/yd2)18.3Arlon SQA-TMS-025

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34009.html

免责声明: 本文 Arlon 51586R015 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4