Arlon 55578XA030 0.032" (0.813 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate

Arlon 55578XA030 0.032" (0.813 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate 物性表: Arlon 55578XA030 0.032" (0.813 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate物性表及特性介绍,Arlon 55578XA030 0.032" (0.813 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate注塑参数详情,如需Arlon 55578XA030 0.032" (0.813 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.24
 
Physical PropertiesMetricEnglishComments
Density 1.24 g/cc0.0448 lb/in³Silicone Property; Arlon SQA-TMS-024
Thickness 38.1 microns1.50 milSide 2, Layer 1; Arlon SQA-TMS-003
 76.2 microns3.00 milInterleave
 292 microns11.5 milSide 2, Layer 2; Arlon SQA-TMS-003
 483 microns19.0 milSubstrate; Arlon SQA-TMS-003
 813 microns32.0 milOverall; Arlon SQA-TMS-003
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore A 4444Silicone Property; ASTM D2240
Tensile Strength 7.58 MPa1100 psiSilicone Property; ASTM D412
Elongation at Break 650 %650 %Silicone Property; ASTM D412
Peel Strength 4.21 kN/m24.0 pliBond Strength; ASTM D624
 
Electrical PropertiesMetricEnglishComments
Dielectric Strength 20.9 kV/mm530 kV/inASTM D149
 
Thermal PropertiesMetricEnglishComments
Maximum Service Temperature, Air 232 °C450 °F
Minimum Service Temperature, Air -56.7 °C-70.0 °F
UL RTI, Electrical 220 °C428 °FE54153
UL RTI, Mechanical without Impact 200 °C392 °FE54153
 
Processing PropertiesMetricEnglishComments
Cure Time  15.0 min
@Temperature 177 °C
0.250 hour
@Temperature 350 °F
Recommended Cure Cycle
 120 min
@Temperature 204 °C
2.00 hour
@Temperature 400 °F
Recommended Postcure Cycle
Shelf Life 6.00 Month
@Temperature 23.9 °C
6.00 Month
@Temperature 75.0 °F
From date of manufacture
 
Descriptive Properties
ColorGray
Total Product Weight (oz/yd2)31Arlon SQA-TMS-025

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34053.html

免责声明: 本文 Arlon 55578XA030 0.032" (0.813 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4