Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate物性表参数

Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate

Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate 物性表: Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate物性表及特性介绍,Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate注塑参数详情,如需Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate下载, 可到相关下载区下载

密度 [g/cm3]: 1.35

Physical Properties	Metric	English	Comments

Density	1.35 g/cc	0.0488 lb/in³	Layer 1, Silicone Property; Arlon SQA-TMS-024
	1.35 g/cc	0.0488 lb/in³	Layer 2, Silicone Property; Arlon SQA-TMS-024
Thickness	76.2 microns	3.00 mil	Interleave
	83.8 microns	3.30 mil	Layer 2; Arlon SQA-TMS-003
	152 microns	6.00 mil	Layer 1; Arlon SQA-TMS-003
	406 microns	16.0 mil	Substrate; Arlon SQA-TMS-003
	1400 microns	55.0 mil	Overall; Arlon SQA-TMS-003

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	60	60	Layer 1, Silicone Property; ASTM D2240
	60	60	Layer 2, Silicone Property; ASTM D2240
Tensile Strength	5.52 MPa	800 psi	Layer 1, Silicone Property; ASTM D412
	5.52 MPa	800 psi	Layer 2, Silicone Property; ASTM D412
Elongation at Break	225 %	225 %	Layer 1, Silicone Property; ASTM D412
	225 %	225 %	Layer 2, Silicone Property; ASTM D412
Tear Strength	15.8 kN/m	90.0 pli	[ppiw], Layer 1, Die B, Silicone Property; ASTM D624
	15.8 kN/m	90.0 pli	[ppiw], Layer 2, Die B, Silicone Property; ASTM D624
Peel Strength	1.47 kN/m	8.40 pli	(S1 to S1), Bond Strength; Arlon SQA-TMS-011

Electrical Properties	Metric	English	Comments
Dielectric Strength	19.3 kV/mm	490 kV/in	ASTM D149

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	232 °C	450 °F
Minimum Service Temperature, Air	-56.7 °C	-70.0 °F
UL RTI, Electrical	220 °C	428 °F	E54153
UL RTI, Mechanical without Impact	220 °C	428 °F	E54153

Processing Properties	Metric	English	Comments
Cure Time	120 min @Temperature 204 °C	2.00 hour @Temperature 400 °F	Recommended Postcure Cycle
	15.0 min @Pressure 0.345 MPa, Temperature 121 °C	0.250 hour @Pressure 50.0 psi, Temperature 250 °F	Recommended Cure Cycle
Shelf Life	6.00 Month @Temperature 21.1 °C	6.00 Month @Temperature 70.0 °F	From date of manufacture

Descriptive Properties
Color	Red
Total Product Weight (oz/yd²)	56.6		Arlon SQA-TMS-025

关键词:
供应
硅胶
Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34069.html

免责声明: 本文 Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络