- 密度 [g/cm3]: 1.18
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.18 g/cc | 0.0426 lb/in³ | Silicone Property; Arlon SQA-TMS-024 | ||
Thickness | 203 microns | 8.00 mil | Substrate; Arlon SQA-TMS-003 | ||
216 microns | 8.50 mil | Side 1; Arlon SQA-TMS-003 | |||
419 microns | 16.5 mil | Overall; Arlon SQA-TMS-003 | |||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Shore A | 47 | 47 | Silicone Property; ASTM D2240 | ||
Tensile Strength | 5.17 MPa | 750 psi | Silicone Property; ASTM D412 | ||
Elongation at Break | 450 % | 450 % | Silicone Property; ASTM D412 | ||
Peel Strength | 1.75 kN/m | 10.0 pli | Bond Strength; ASTM D624 | ||
Electrical Properties | Metric | English | Comments | ||
Dielectric Strength | 31.5 kV/mm | 800 kV/in | ASTM D149 | ||
Thermal Properties | Metric | English | Comments | ||
Maximum Service Temperature, Air | 232 °C | 450 °F | |||
Minimum Service Temperature, Air | -56.7 °C | -70.0 °F | |||
Processing Properties | Metric | English | Comments | ||
Cure Time | 120 min @Temperature 204 °C | 2.00 hour @Temperature 400 °F | Recommended Postcure Cycle | ||
15.0 min @Pressure 0.345 MPa, Temperature 177 °C | 0.250 hour @Pressure 50.0 psi, Temperature 350 °F | Recommended Cure Cycle | |||
Shelf Life | 3.00 Month @Temperature 23.9 °C | 3.00 Month @Temperature 75.0 °F | From date of manufacture | ||
Descriptive Properties | |||||
Color | Red | ||||
Total Product Weight (oz/yd2) | 20.2 | Arlon SQA-TMS-025 |