| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Thickness | >= 25.4 microns | >= 1.00 mil | Side 1 | ||
| 38.1 microns | 1.50 mil | Polyethylene, Interleave | |||
| >= 50.8 microns | >= 2.00 mil | Side 2 | |||
| 63.5 microns | 2.50 mil | Prime Coated 1080 Fiberglass (same as 108/no plied yarns), Substrate | |||
| 127 - 165 microns | 5.00 - 6.50 mil | Overall | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 40 - 50 | 40 - 50 | Compound Property | ||
| Tensile Strength | >= 5.52 MPa | >= 800 psi | Compound Property | ||
| Elongation at Break | >= 500 % | >= 500 % | Compound Property | ||
| Peel Strength | >= 0.526 kN/m | >= 3.00 pli | Bond Strength | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | >= 15.7 kV/mm | >= 400 kV/in | |||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 232 °C | 450 °F | |||
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 15.0 min @Temperature 177 °C | 0.250 hour @Temperature 350 °F | Recommended Cure Cycle | ||
| 120 min @Temperature 232 °C | 2.00 hour @Temperature 450 °F | Recommended Postcure Cycle | |||
| Shelf Life | 6.00 Month @Temperature <=23.9 °C | 6.00 Month @Temperature <=75.0 °F | From date of manufacture | ||
| Descriptive Properties | |||||
| Color | Red | ||||
| Total Product Weight (oz/yd2) | 4.5 - 5.5 | ||||
| Uncoated Fabric Break Strength | 40 lb/in | Fill Direction, Substrate Property | |||
| 70 lb/in | Warp Direction, Substrate Property | ||||
