Overview of materials for Phenolic, Novolac, Mineral/Glass Filled

Overview of materials for Phenolic, Novolac, Mineral/Glass Filled 物性表: Overview of materials for Phenolic, Novolac, Mineral/Glass Filled物性表及特性介绍,Overview of materials for Phenolic, Novolac, Mineral/Glass Filled注塑参数详情,如需Overview of materials for Phenolic, Novolac, Mineral/Glass Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.55
  • 吸水率 [%]: 0.03
  • 缺口冲击强度: 0.163
  • 断裂伸长率 [%]: 60.0
  • 弯曲强度 [MPa]: 31.0
  • 弯曲模量 [MPa]: 7.50
 
Physical PropertiesMetricEnglishComments
Density 1.55 - 2.10 g/cc0.0560 - 0.0759 lb/in³Average value: 1.87 g/cc Grade Count:23
Water Absorption 0.0300 - 0.150 %0.0300 - 0.150 %Average value: 0.0842 % Grade Count:16
Linear Mold Shrinkage 0.000600 - 0.00350 cm/cm0.000600 - 0.00350 in/inAverage value: 0.00197 cm/cm Grade Count:23
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell E 80.0 - 12580.0 - 125Average value: 97.9 Grade Count:13
Tensile Strength, Ultimate 31.0 - 108 MPa4500 - 15700 psiAverage value: 74.4 MPa Grade Count:23
Elongation at Break 0.272 - 1.80 %0.272 - 1.80 %Average value: 0.708 % Grade Count:19
Modulus of Elasticity 9.50 - 30.0 GPa1380 - 4350 ksiAverage value: 18.7 GPa Grade Count:19
Flexural Yield Strength 60.0 - 190 MPa8700 - 27600 psiAverage value: 137 MPa Grade Count:23
Flexural Modulus 7.50 - 27.0 GPa1090 - 3920 ksiAverage value: 16.7 GPa Grade Count:23
Compressive Yield Strength 156 - 410 MPa22600 - 59500 psiAverage value: 250 MPa Grade Count:23
Poissons Ratio 0.310 - 0.3300.310 - 0.330Average value: 0.317 Grade Count:3
Shear Modulus 5.46 - 5.98 GPa792 - 867 ksiAverage value: 5.76 GPa Grade Count:3
Izod Impact, Notched 0.163 - 0.450 J/cm0.305 - 0.843 ft-lb/inAverage value: 0.363 J/cm Grade Count:12
Charpy Impact Unnotched 0.400 - 1.50 J/cm²1.90 - 7.14 ft-lb/in²Average value: 0.928 J/cm² Grade Count:10
Charpy Impact, Notched 0.195 - 0.550 J/cm²0.928 - 2.62 ft-lb/in²Average value: 0.341 J/cm² Grade Count:20
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.90e+11 - 1.74e+15 ohm-cm1.90e+11 - 1.74e+15 ohm-cmAverage value: 1.77e+14 ohm-cm Grade Count:10
Insulation Resistance 1.00e+11 - 1.00e+14 ohm1.00e+11 - 1.00e+14 ohmAverage value: 2.19e+13 ohm Grade Count:3
Dielectric Constant 4.50 - 5.604.50 - 5.60Average value: 5.13 Grade Count:11
Dielectric Strength 8.60 - 35.0 kV/mm218 - 889 kV/inAverage value: 17.7 kV/mm Grade Count:20
Dissipation Factor 0.0120 - 0.2860.0120 - 0.286Average value: 0.0557 Grade Count:11
Arc Resistance 48.0 - 185 sec48.0 - 185 secAverage value: 152 sec Grade Count:13
Comparative Tracking Index 175 - 325 V175 - 325 VAverage value: 207 V Grade Count:17
 
Thermal PropertiesMetricEnglishComments
CTE, linear 12.0 - 30.0 µm/m-°C6.67 - 16.7 µin/in-°FAverage value: 18.4 µm/m-°C Grade Count:14
 49.0 - 75.0 µm/m-°C
@Temperature 40.0 - 130 °C
27.2 - 41.7 µin/in-°F
@Temperature 104 - 266 °F
Average value: 62.0 µm/m-°C Grade Count:2
CTE, linear, Transverse to Flow 20.0 - 45.0 µm/m-°C11.1 - 25.0 µin/in-°FAverage value: 28.7 µm/m-°C Grade Count:10
Thermal Conductivity 0.580 - 0.580 W/m-K
@Temperature 100 - 100 °C
4.03 - 4.03 BTU-in/hr-ft²-°F
@Temperature 212 - 212 °F
Average value: 0.580 W/m-K Grade Count:1
Maximum Service Temperature, Air 150 - 250 °C302 - 482 °FAverage value: 211 °C Grade Count:12
Deflection Temperature at 1.8 MPa (264 psi) 170 - 282 °C338 - 540 °FAverage value: 229 °C Grade Count:23
Deflection Temperature at 8.0 MPa 150 - 185 °C302 - 365 °FAverage value: 166 °C Grade Count:3
Flammability, UL94 HB - V-0HB - V-0Grade Count:19
Shrinkage 0.000600 - 0.200 %0.000600 - 0.200 %Average value: 0.0684 % Grade Count:19

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34738.html

免责声明: 本文 Overview of materials for Phenolic, Novolac, Mineral/Glass Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4