Overview of materials for Phenolic, Novolac, Mineral Filled

Overview of materials for Phenolic, Novolac, Mineral Filled 物性表: Overview of materials for Phenolic, Novolac, Mineral Filled物性表及特性介绍,Overview of materials for Phenolic, Novolac, Mineral Filled注塑参数详情,如需Overview of materials for Phenolic, Novolac, Mineral Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.46
  • 吸水率 [%]: 0.03
  • 缺口冲击强度: 0.138
  • 断裂伸长率 [%]: 55.0
  • 弯曲强度 [MPa]: 40.0
  • 弯曲模量 [MPa]: 6.00
 
Physical PropertiesMetricEnglishComments
Density 1.46 - 1.99 g/cc0.0527 - 0.0719 lb/in³Average value: 1.58 g/cc Grade Count:32
Water Absorption 0.0300 - 0.290 %0.0300 - 0.290 %Average value: 0.168 % Grade Count:25
Linear Mold Shrinkage 0.00180 - 0.00860 cm/cm0.00180 - 0.00860 in/inAverage value: 0.00530 cm/cm Grade Count:32
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell E 70.0 - 91.070.0 - 91.0Average value: 80.9 Grade Count:23
Tensile Strength, Ultimate 40.0 - 119 MPa5800 - 17300 psiAverage value: 53.1 MPa Grade Count:32
Elongation at Break 0.310 - 1.70 %0.310 - 1.70 %Average value: 0.761 % Grade Count:32
Modulus of Elasticity 8.10 - 23.0 GPa1170 - 3340 ksiAverage value: 10.8 GPa Grade Count:32
Flexural Yield Strength 55.0 - 240 MPa7980 - 34800 psiAverage value: 92.9 MPa Grade Count:32
Flexural Modulus 6.00 - 21.0 GPa870 - 3050 ksiAverage value: 9.46 GPa Grade Count:32
Compressive Yield Strength 152 - 434 MPa22000 - 62900 psiAverage value: 199 MPa Grade Count:32
Poissons Ratio 0.270 - 0.3500.270 - 0.350Average value: 0.331 Grade Count:14
Shear Modulus 3.00 - 5.82 GPa435 - 844 ksiAverage value: 3.73 GPa Grade Count:14
Izod Impact, Notched 0.138 - 0.243 J/cm0.259 - 0.455 ft-lb/inAverage value: 0.169 J/cm Grade Count:23
Charpy Impact Unnotched 0.600 - 1.36 J/cm²2.86 - 6.47 ft-lb/in²Average value: 0.889 J/cm² Grade Count:8
Charpy Impact, Notched 0.150 - 0.450 J/cm²0.714 - 2.14 ft-lb/in²Average value: 0.211 J/cm² Grade Count:32
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+11 - 2.10e+14 ohm-cm1.00e+11 - 2.10e+14 ohm-cmAverage value: 1.05e+13 ohm-cm Grade Count:26
Insulation Resistance 1.00e+9 - 1.00e+11 ohm1.00e+9 - 1.00e+11 ohmAverage value: 4.52e+10 ohm Grade Count:5
Dielectric Constant 4.40 - 6.104.40 - 6.10Average value: 5.33 Grade Count:24
Dielectric Strength 6.90 - 30.0 kV/mm175 - 762 kV/inAverage value: 14.3 kV/mm Grade Count:32
Dissipation Factor 0.0172 - 0.08200.0172 - 0.0820Average value: 0.0514 Grade Count:24
Arc Resistance 137 - 188 sec137 - 188 secAverage value: 168 sec Grade Count:24
Comparative Tracking Index 150 - 225 V150 - 225 VAverage value: 177 V Grade Count:32
 
Thermal PropertiesMetricEnglishComments
CTE, linear 16.0 - 55.0 µm/m-°C8.89 - 30.6 µin/in-°FAverage value: 35.9 µm/m-°C Grade Count:9
 21.0 - 82.0 µm/m-°C
@Temperature 40.0 - 130 °C
11.7 - 45.6 µin/in-°F
@Temperature 104 - 266 °F
Average value: 50.5 µm/m-°C Grade Count:19
CTE, linear, Transverse to Flow 24.0 - 65.0 µm/m-°C13.3 - 36.1 µin/in-°FAverage value: 46.1 µm/m-°C Grade Count:8
Thermal Conductivity 0.440 - 0.620 W/m-K
@Temperature 100 - 100 °C
3.05 - 4.30 BTU-in/hr-ft²-°F
@Temperature 212 - 212 °F
Average value: 0.510 W/m-K Grade Count:14
Maximum Service Temperature, Air 190 - 232 °C374 - 450 °FAverage value: 208 °C Grade Count:24
Deflection Temperature at 1.8 MPa (264 psi) 150 - 250 °C302 - 482 °FAverage value: 180 °C Grade Count:32
Deflection Temperature at 8.0 MPa 130 - 178 °C266 - 352 °FAverage value: 147 °C Grade Count:7
Flammability, UL94 HB - V-0HB - V-0Grade Count:31
Oxygen Index 26.4 - 45.0 %26.4 - 45.0 %Average value: 33.8 % Grade Count:20
Shrinkage 0.0400 - 0.340 %0.0400 - 0.340 %Average value: 0.176 % Grade Count:31

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34757.html

免责声明: 本文 Overview of materials for Phenolic, Novolac, Mineral Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4