- 密度 [g/cm3]: 1.77
- 吸水率 [%]: 0.05
- 缺口冲击强度: 0.48
- 弯曲强度 [MPa]: 103.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.77 g/cc | 0.0639 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | ASTM D1895 |
| Water Absorption | 0.050 % | 0.050 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0015 cm/cm | 0.0015 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 103 MPa | 14900 psi | ASTM D638 |
| Tensile Modulus | 15.8 GPa | 2290 ksi | ASTM D638 |
| Flexural Strength | 138 MPa | 20000 psi | |
| Compressive Strength | 345 MPa | 50000 psi | ASTM D695 |
| Izod Impact, Notched | 0.480 J/cm | 0.899 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.3 @Frequency 1e+6 Hz | 4.3 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 15.7 kV/mm | 399 kV/in | Step by step; ASTM D149 |
| 17.7 kV/mm | 450 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.020 @Frequency 1e+6 Hz | 0.020 @Frequency 1e+6 Hz | ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 150 °C @Thickness 3.00 mm | 302 °F @Thickness 0.118 in | |
| Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 399 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| V-0 @Thickness 3.00 mm | V-0 @Thickness 0.118 in | ||
| V-0 @Thickness 6.00 mm | V-0 @Thickness 0.236 in | ||