| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 0.950 - 1.45 g/cc | 0.950 - 1.45 g/cc | ASTM D792 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 68 - 82 | 68 - 82 | ASTM D2240 | ||
| Tensile Strength | >= 4.48 MPa | >= 650 psi | ASTM D412 | ||
| Elongation at Break | >= 70 % | >= 70 % | ASTM D412 | ||
| Compression Set | <= 45 % @Temperature 100 °C, Time 252000 sec | <= 45 % @Temperature 212 °F, Time 70.0 hour | ASTM D395, Method B | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | <= 7.0 ohm-cm | <= 7.0 ohm-cm | without pressure-sensitive adhesive; CEPS-0002 | ||
| Shielding Effectiveness | >= 50 dB @Frequency 1.00e+10 Hz | >= 50 dB @Frequency 1.00e+10 Hz | Plane Wave; Method 1, CHO-TM-TP08 | ||
| >= 60 dB @Frequency 2.00e+9 Hz | >= 60 dB @Frequency 2.00e+9 Hz | Plane Wave; Method 1, CHO-TM-TP08 | |||
| >= 80 dB @Frequency 1.00e+8 Hz | >= 80 dB @Frequency 1.00e+8 Hz | E-Field; Method 1, CHO-TM-TP08 | |||
| >= 80 dB @Frequency 5.00e+8 Hz | >= 80 dB @Frequency 5.00e+8 Hz | E-Field; Method 1, CHO-TM-TP08 | |||
| Thermal Properties | Metric | English | Comments | ||
| Thermal Conductivity | 0.600 W/m-K @Pressure 2.07 MPa | 4.16 BTU-in/hr-ft²-°F @Pressure 300 psi | ASTM D5470 | ||
| Maximum Service Temperature, Air | 200 °C | 392 °F | |||
| Minimum Service Temperature, Air | -45.0 °C | -49.0 °F | Flex TR10 | ||
| Descriptive Properties | |||||
| Binder | Silicone | ||||
| Filler | Carbon | ||||
| Heat Aging | <7 ohm-cm | 150°C for 48 hr, CEPS-0002 | |||
