Dow Nordel® IP 4640 Low Cost General Purpose Hose物性表参数

Dow Nordel® IP 4640 Low Cost General Purpose Hose

Dow Nordel® IP 4640 Low Cost General Purpose Hose 物性表: Dow Nordel® IP 4640 Low Cost General Purpose Hose物性表及特性介绍,Dow Nordel® IP 4640 Low Cost General Purpose Hose注塑参数详情,如需Dow Nordel® IP 4640 Low Cost General Purpose Hose下载, 可到相关下载区下载

密度 [g/cm3]: 1.157
弯曲强度 [MPa]: 7.2
脆化温度 [℃]: -36.0

Physical Properties	Metric	English	Comments

Density	1.157 g/cc	0.04180 lb/in³
Mooney Viscosity	37 @Temperature 100 °C	37 @Temperature 212 °F	ML 1 + 4

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	64	64	Vulcanizate, Press cured, TC95 +3min at 160°C
Tensile Strength, Ultimate	7.20 MPa	1040 psi	Vulcanizate, Press cured, TC95 +3min at 160°C
Elongation at Break	423 %	423 %	Vulcanizate, Press cured, TC95 +3min at 160°C
100% Modulus	0.00260 GPa	0.377 ksi	Vulcanizate, Press cured, TC95 +3min at 160°C
200% Modulus	0.00520 GPa	0.754 ksi	Vulcanizate, Press cured, TC95 +3min at 160°C
300% Modulus	0.00640 GPa	0.928 ksi	Vulcanizate, Press cured, TC95 +3min at 160°C
Tear Strength	29.6 kN/m	169 pli	Die C, Vulcanizate, Press cured, TC95 +3min at 160°C
Compression Set	64 % @Temperature 125 °C	64 % @Temperature 257 °F	Pellets cured MDR TC95 + 15 min at 160°C, 70 hr at 125°C; Method B

Thermal Properties	Metric	English	Comments
Brittleness Temperature	-36.0 °C	-32.8 °F	Temperature Retraction, TR-10

关键词:
TSE
供应
Dow Nordel® IP 4640 Low Cost General Purpose Hose

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-36425.html

免责声明: 本文 Dow Nordel® IP 4640 Low Cost General Purpose Hose 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息