3M Dyneon™ Aflas® FA-100H PTFE Fluoroelastomer

3M Dyneon™ Aflas® FA-100H PTFE Fluoroelastomer 物性表: 3M Dyneon™ Aflas® FA-100H PTFE Fluoroelastomer物性表及特性介绍,3M Dyneon™ Aflas® FA-100H PTFE Fluoroelastomer注塑参数详情,如需3M Dyneon™ Aflas® FA-100H PTFE Fluoroelastomer下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.55
  • 弯曲强度 [MPa]: 19.0
 
Physical PropertiesMetricEnglishComments
Density 1.55 g/cc0.0560 lb/in³
Oxygen Transmission 150 cc-mm/m²-24hr-atm381 cc-mil/100 in²-24hr-atm
Mooney Viscosity 110
@Temperature 100 °C
110
@Temperature 212 °F
ML1+10
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore A 7171
Tensile Strength, Ultimate 19.0 MPa2760 psi
Elongation at Break 375 %375 %
Modulus of Elasticity 0.00280 GPa0.406 ksiM100
Coefficient of Friction, Dynamic 0.700.70
Compression Set 50 %
@Temperature 200 °C
50 %
@Temperature 392 °F
70 hr; ASTM D395B
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+15 - 1.00e+16 ohm-cm1.00e+15 - 1.00e+16 ohm-cm
Dielectric Constant 2.5
@Frequency 6.00e+7 Hz
2.5
@Frequency 6.00e+7 Hz
Dielectric Strength 23.0 kV/mm584 kV/in
 
Thermal PropertiesMetricEnglishComments
CTE, linear 240 µm/m-°C
@Temperature 20.0 °C
133 µin/in-°F
@Temperature 68.0 °F
Specific Heat Capacity 1.67 J/g-°C0.399 BTU/lb-°F
Thermal Conductivity 0.200 W/m-K1.39 BTU-in/hr-ft²-°F
Glass Transition Temp, Tg 3.00 °C37.4 °FTR10

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-36553.html

免责声明: 本文 3M Dyneon™ Aflas® FA-100H PTFE Fluoroelastomer 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4