Cytec EN-13 (Conap) Casting, Potting, and Molding Compound

Cytec EN-13 (Conap) Casting, Potting, and Molding Compound 物性表: Cytec EN-13 (Conap) Casting, Potting, and Molding Compound物性表及特性介绍,Cytec EN-13 (Conap) Casting, Potting, and Molding Compound注塑参数详情,如需Cytec EN-13 (Conap) Casting, Potting, and Molding Compound下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.04
  • 吸水率 [%]: 0.4
  • 弯曲强度 [MPa]: 4.14
 
Physical PropertiesMetricEnglishComments
Density 1.04 g/cc0.0376 lb/in³
Water Absorption 0.40 %0.40 %24 hours
Viscosity 1500 cP
@Temperature 25.0 °C
1500 cP
@Temperature 77.0 °F
Linear Mold Shrinkage 0.0115 cm/cm0.0115 in/in
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore A 6565Tolerance of +/- 5
Tensile Strength, Ultimate 4.14 MPa600 psi
Elongation at Break 130 %130 %
Tear Strength 6.14 kN/m35.0 pli
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity <= 6.30e+13 ohm-cm<= 6.30e+13 ohm-cm
Insulation Resistance 3.90e+12 ohm3.90e+12 ohmValue at 25°C
Dielectric Constant  3.13
@Frequency 1e+6 Hz
3.13
@Frequency 1e+6 Hz
 4.7
@Frequency 100 Hz
4.7
@Frequency 100 Hz
Dielectric Strength 23.1 kV/mm
@Thickness 1.59 mm,
Temperature 25.0 °C
588 kV/in
@Thickness 0.0625 in,
Temperature 77.0 °F
Dissipation Factor  0.011
@Frequency 1e+6 Hz
0.011
@Frequency 1e+6 Hz
 0.151
@Frequency 100 Hz
0.151
@Frequency 100 Hz
Arc Resistance >= 120 sec>= 120 secValue at 25°C
 
Processing PropertiesMetricEnglishComments
Cure Time 960 min16.0 hour80°C
 10080 - 14400 min168.0 - 240 hour25°C
Pot Life 35 min35 minValue for 0.5 lbm at 25°C
 
Descriptive Properties
ColorOpaque Amber

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-36771.html

免责声明: 本文 Cytec EN-13 (Conap) Casting, Potting, and Molding Compound 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4