Taiwan PU Corporation TPL-THANE 5085-A/B High Pressure Urethane Spraying Elastomer物性表参数

Taiwan PU Corporation TPL-THANE 5085-A/B High Pressure Urethane Spraying Elastomer

Taiwan PU Corporation TPL-THANE 5085-A/B High Pressure Urethane Spraying Elastomer 物性表: Taiwan PU Corporation TPL-THANE 5085-A/B High Pressure Urethane Spraying Elastomer物性表及特性介绍,Taiwan PU Corporation TPL-THANE 5085-A/B High Pressure Urethane Spraying Elastomer注塑参数详情,如需Taiwan PU Corporation TPL-THANE 5085-A/B High Pressure Urethane Spraying Elastomer下载, 可到相关下载区下载

密度 [g/cm3]: 1.01

Physical Properties	Metric	English	Comments

Density	1.01 g/cc	0.0365 lb/in³	A component
	1.10 g/cc	0.0397 lb/in³	B component
Viscosity	500 - 700 cP	500 - 700 cP	A component
	1000 - 1200 cP	1000 - 1200 cP	B component

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	85 - 90	85 - 90
Tensile Strength at Break	>= 7.85 MPa	>= 1140 psi
Elongation at Break	>= 300 %	>= 300 %
Tear Strength	>= 29.4 kN/m	>= 168 pli

Processing Properties	Metric	English	Comments
Processing Temperature	60.0 - 65.0 °C	140 - 149 °F	Temperature setting, B component
	65.0 - 70.0 °C	149 - 158 °F	Temperature setting, A component

Descriptive Properties
Mixing Ratio	1:1

关键词:
供应
聚氨酯TS
Taiwan PU Corporation TPL-THANE 5085-A/B High Pressure Urethane Spraying Elastomer

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-37602.html

免责声明: 本文 Taiwan PU Corporation TPL-THANE 5085-A/B High Pressure Urethane Spraying Elastomer 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络