- 熔体流动速率 [g/10min]: 32.2
- 密度 [g/cm3]: 1.61
- 吸水率 [%]: 0.4
- 拉伸强度 [MPa]: 105.0
- 热变形温度 [℃]: 220.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.61 g/cc | 0.0582 lb/in³ | ISO 1183 | ||
| Water Absorption | 0.40 % | 0.40 % | Saturation; DIN 53495/1L | ||
| Moisture Absorption at Equilibrium | 0.20 % | 0.20 % | 23°C; 50% RH | ||
| Linear Mold Shrinkage, Flow | 0.0055 cm/cm | 0.0055 in/in | 60x60x2 mm; ISO 294 | ||
| Linear Mold Shrinkage, Transverse | 0.0147 cm/cm | 0.0147 in/in | 60x60x2 mm; ISO 294 | ||
| Melt Flow | 32.2 g/10 min @Load 2.16 kg, Temperature 275 °C | 32.2 g/10 min @Load 4.76 lb, Temperature 527 °F | ISO 1133 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Yield | 105 MPa | 15200 psi | 50 mm/min; ISO 527-2 | ||
| Elongation at Break | 2.4 % | 2.4 % | 50mm/min; ISO 527-2 | ||
| Modulus of Elasticity | 9.50 GPa | 1380 ksi | ISO 527-2 | ||
| Flexural Strength | 180 MPa | 26100 psi | ISO 178 | ||
| Charpy Impact Unnotched | 4.20 J/cm² | 20.0 ft-lb/in² | ISO 179/1eU | ||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | ISO 179/1eA | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | >= 1.00e+16 ohm-cm | >= 1.00e+16 ohm-cm | IEC 93 | ||
| Surface Resistance | >= 1.00e+16 ohm | >= 1.00e+16 ohm | IEC 93 | ||
| Dielectric Constant | 3.6 | 3.6 | IEC 250 | ||
| Dissipation Factor | 0.0142 | 0.0142 | IEC 250 | ||
| Comparative Tracking Index | 600 V | 600 V | Test solution A; IEC 112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 30.0 - 120 µm/m-°C @Temperature 23.0 - 80.0 °C | 16.7 - 66.7 µin/in-°F @Temperature 73.4 - 176 °F | DIN 53752 | ||
| Melting Point | 220 - 225 °C | 428 - 437 °F | DSC; ISO 11357-3 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 220 °C | 428 °F | ISO 75-2 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 201 °C | 394 °F | ISO 75-2 | ||
| Flammability, UL94 | V-2 @Thickness 0.800 mm | V-2 @Thickness 0.0315 in | |||
| V-0 @Thickness 1.60 mm | V-0 @Thickness 0.0630 in | ||||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 260 - 280 °C | 500 - 536 °F | Injection-molding | ||
| Mold Temperature | 60.0 - 100 °C | 140 - 212 °F | |||
| Descriptive Properties | |||||
| Color | Natural, Colored, Black and Special Colors | ||||
| Commercial Status | Europe | ||||
| Primary Processing Technique | Injection Molding | ||||