- 熔体流动速率 [g/10min]: 20.0
- 缺口冲击强度: 9.0
- 弯曲模量 [MPa]: 7.50
- 热变形温度 [℃]: 216.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 1.58 g/cc | 1.58 g/cc | ASTM D792 |
Moisture Absorption at Equilibrium | 0.17 % | 0.17 % | 50% RH; ASTM D570 |
Linear Mold Shrinkage, Flow | 0.0040 cm/cm | 0.0040 in/in | ASTM D955 |
Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in | ASTM D955 |
Melt Flow | 20 g/10 min @Load 2.16 kg, Temperature 250 °C | 20 g/10 min @Load 4.76 lb, Temperature 482 °F | ASTM D1238 |
Mechanical Properties | Metric | English | Comments |
Tensile Strength at Break | 110 MPa | 16000 psi | ASTM D638 |
Tensile Modulus | 10.0 GPa | 1450 ksi | ASTM D638 |
Flexural Strength | 170 MPa | 24700 psi | ASTM D790 |
Flexural Modulus | 7.50 GPa | 1090 ksi | ASTM D790 |
Izod Impact, Notched (ISO) | 9.00 kJ/m² | 4.28 ft-lb/in² | ASTM D256 |
Izod Impact, Unnotched (ISO) | 55.0 kJ/m² | 26.2 ft-lb/in² | ASTM D256 |
Electrical Properties | Metric | English | Comments |
Volume Resistivity | 1.30e+16 ohm-cm | 1.30e+16 ohm-cm | ASTM D257 |
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
Thermal Properties | Metric | English | Comments |
Deflection Temperature at 0.46 MPa (66 psi) | 216 °C | 421 °F | ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 206 °C | 403 °F | ASTM D648 |
Flammability, UL94 | V-0 @Thickness 0.800 mm | V-0 @Thickness 0.0315 in | |
V-0 @Thickness 1.60 mm | V-0 @Thickness 0.0630 in |