- 熔体流动速率 [g/10min]: 36.3
- 密度 [g/cm3]: 1.65
- 吸水率 [%]: 0.4
- 热变形温度 [℃]: 221.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.65 g/cc | 0.0596 lb/in³ | ISO 1183 |
Water Absorption at Saturation | 0.40 % | 0.40 % | ISO 62 |
Linear Mold Shrinkage | 0.0030 cm/cm @Thickness 2.00 mm | 0.0030 in/in @Thickness 0.0787 in | sheet with film gate at rim, mold temperature 80°C |
Linear Mold Shrinkage, Transverse | 0.017 cm/cm | 0.017 in/in | |
Melt Flow | 36.3 g/10 min @Load 2.16 kg, Temperature 250 °C | 36.3 g/10 min @Load 4.76 lb, Temperature 482 °F | ISO 1133 |
Mechanical Properties | Metric | English | Comments |
Tensile Strength at Break | 100 MPa | 14500 psi | ISO 527-1/2 |
Elongation at Break | 1.7 % | 1.7 % | ISO 527-1/2 |
Tensile Modulus | 8.00 GPa | 1160 ksi | ISO 527-1/-2 |
Charpy Impact Unnotched | 4.20 J/cm² @Temperature -30.0 °C | 20.0 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eU |
4.20 J/cm² @Temperature 23.0 °C | 20.0 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eU | |
Charpy Impact, Notched | 0.900 J/cm² @Temperature -30.0 °C | 4.28 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eA |
0.900 J/cm² @Temperature 23.0 °C | 4.28 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eA | |
Electrical Properties | Metric | English | Comments |
Surface Resistance | 1.00e+15 ohm | 1.00e+15 ohm | IEC 60093 |
Dielectric Strength | 30.0 kV/mm | 762 kV/in | K20/P50; IEC 60243-1 |
Comparative Tracking Index | 150 V | 150 V | 100 drops value; IEC 60112 |
175 V | 175 V | Test Solution A CTI; IEC 60112 | |
Thermal Properties | Metric | English | Comments |
Deflection Temperature at 0.46 MPa (66 psi) | 221 °C | 430 °F | ISO 75-1/-2 |
Flammability, UL94 | V-0 @Thickness 0.800 mm | V-0 @Thickness 0.0315 in | IEC 60695 |
V-0 @Thickness 1.60 mm | V-0 @Thickness 0.0630 in | IEC 60695 |