Kolon SPESIN® KP211 General Purpose PBT Resin

Kolon SPESIN® KP211 General Purpose PBT Resin 物性表: Kolon SPESIN® KP211 General Purpose PBT Resin物性表及特性介绍,Kolon SPESIN® KP211 General Purpose PBT Resin注塑参数详情,如需Kolon SPESIN® KP211 General Purpose PBT Resin下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.31
  • 吸水率 [%]: 0.08
  • 缺口冲击强度: 0.392
  • 断裂伸长率 [%]: 88.3
  • 弯曲强度 [MPa]: 58.8
  • 弯曲模量 [MPa]: 2.45
  • 硬度: 118.0
  • 热变形温度 [℃]: 155.0
 
Physical PropertiesMetricEnglishComments
Density 1.31 g/cc0.0473 lb/in³DIN 53479; ASTM D792
Water Absorption 0.080 %0.080 %DIN 53475; ASTM D570
Linear Mold Shrinkage 0.017 - 0.023 cm/cm0.017 - 0.023 in/inASTM D955
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell R 118118DIN 53505; ASTM D785
Tensile Strength, Ultimate 58.8 MPa8530 psiDIN 53455; ASTM D638
Elongation at Break 100 %100 %DIN 53455; ASTM D638
Flexural Yield Strength 88.3 MPa12800 psiDIN 53455; ASTM D790
Flexural Modulus 2.45 GPa356 ksiDIN 53452; ASTM D790
Izod Impact, Notched 0.392 J/cm0.735 ft-lb/inDIN 53453; ASTM D256
 
Electrical PropertiesMetricEnglishComments
Dielectric Constant 3.1
@Frequency 1e+6 Hz
3.1
@Frequency 1e+6 Hz
ASTM D150/DIN 53483
Dielectric Strength 28.0 kV/mm711 kV/inASTM D149/DIN 53481
Arc Resistance 120 sec120 secASTM D495
 
Thermal PropertiesMetricEnglishComments
CTE, linear 80.0 µm/m-°C
@Temperature 20.0 °C
44.4 µin/in-°F
@Temperature 68.0 °F
DIN 53752; ASTM D696
Melting Point 224 °C435 °FDIN 53736; ASTM D789
Deflection Temperature at 0.46 MPa (66 psi) 155 °C311 °FDIN 53461; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 60.0 °C140 °FDIN 53461; ASTM D648
Flammability, UL94 HBHB

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-38645.html

免责声明: 本文 Kolon SPESIN® KP211 General Purpose PBT Resin 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4