- 密度 [g/cm3]: 1.64
- 热变形温度 [℃]: 238.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.64 g/cc | 0.0592 lb/in³ | ISO 1183 | ||
| Filler Content | 36 % | 36 % | |||
| Linear Mold Shrinkage, Flow | 0.0030 cm/cm @Thickness 2.00 mm | 0.0030 in/in @Thickness 0.0787 in | Parallel; ISO 294-4 | ||
| Linear Mold Shrinkage, Transverse | 0.0080 cm/cm @Thickness 2.00 mm | 0.0080 in/in @Thickness 0.0787 in | Normal; ISO 294-4 | ||
| Melt Index of Compound | 27 g/10 min @Load 5.00 kg, Temperature 280 °C | 27 g/10 min @Load 11.0 lb, Temperature 536 °F | cm3/10 min; ISO 1133 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 207 MPa @Temperature 23.0 °C | 30000 psi @Temperature 73.4 °F | ISO 527 | ||
| Elongation at Break | 2.4 % @Temperature 23.0 °C | 2.4 % @Temperature 73.4 °F | ISO 527 | ||
| Tensile Modulus | 14.0 GPa @Temperature 23.0 °C | 2030 ksi @Temperature 73.4 °F | ISO 527 | ||
| Charpy Impact Unnotched | 6.50 J/cm² @Temperature 23.0 °C | 30.9 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eU | ||
| Charpy Impact, Notched | 1.20 J/cm² @Temperature 23.0 °C | 5.71 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eA | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 21.5 kV/mm @Temperature 23.0 °C | 546 kV/in @Temperature 73.4 °F | IEC 60243-1 | ||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 238 °C | 460 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 228 °C | 442 °F | ISO 75-1/-2 | ||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 246 °C | 475 °F | 10°C/min; ISO 11357-1/-3 | ||
| 280 °C | 536 °F | Optimum | |||
| 270 - 290 °C | 518 - 554 °F | ||||
| Mold Temperature | >= 130 °C | >= 266 °F | |||
| 140 °C | 284 °F | optimum | |||
| Drying Temperature | 120 °C | 248 °F | |||
| Dry Time | 4.00 hour | 4.00 hour | |||
| Moisture Content | <= 0.010 % | <= 0.010 % | |||
| Descriptive Properties | |||||
| Appearance | Natural Color | ||||
| Drying Recommended | Yes | ||||
| Filler | Glass fiber | ||||
| Forms | Pellets | ||||
| Generic | PET | ||||
| Material Status | Preliminary Data | ||||
| Processing Method | Injection Molding | ||||
| Product Category | Color Stable Resins | ||||
| Glass Reinforced Resins | |||||
| Region Available - Global | Yes | ||||
| RoHS Compliance | Contact Manufacturer | ||||