SABIC Innovative Plastics XYLEX X7300CL PC+POLYESTER (Europe-Africa-Middle East)物性表参数

熔体流动速率 [g/10min]: 21.0
密度 [g/cm3]: 1.18
吸水率 [%]: 0.5
缺口冲击强度: 6.6
拉伸强度 [MPa]: 49.0
断裂伸长率 [%]: 83.0
弯曲模量 [MPa]: 1.94
热变形温度 [℃]: 102.0
透光率 [%]: 88.0

Physical Properties	Metric	English	Comments

Specific Gravity	1.20 g/cc	1.20 g/cc	ASTM D792
Density	1.18 g/cc	0.0426 lb/in³	ISO 1183
Moisture Absorption	0.120 %	0.120 %	23°C / 50% RH; ISO 62
Water Absorption at Saturation	0.50 %	0.50 %	ISO 62
Linear Mold Shrinkage, Flow	0.0040 - 0.0080 cm/cm @Thickness 3.20 mm	0.0040 - 0.0080 in/in @Thickness 0.126 in	SABIC Method
Linear Mold Shrinkage, Transverse	0.0050 - 0.0070 cm/cm @Thickness 3.20 mm	0.0050 - 0.0070 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	21 g/10 min @Load 2.16 kg, Temperature 265 °C	21 g/10 min @Load 4.76 lb, Temperature 509 °F	ASTM D1238
	44 g/10 min @Load 1.20 kg, Temperature 300 °C	44 g/10 min @Load 2.65 lb, Temperature 572 °F	ASTM D1238
Melt Index of Compound	20 g/10 min @Load 2.16 kg, Temperature 265 °C	20 g/10 min @Load 4.76 lb, Temperature 509 °F	MVR [cm^3/10 min]; ISO 1133
	42 g/10 min @Load 1.20 kg, Temperature 300 °C	42 g/10 min @Load 2.65 lb, Temperature 572 °F	MVR [cm^3/10 min]; ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	52.0 MPa	7540 psi	Type I, 50 mm/min; ASTM D638
	55.0 MPa	7980 psi	50 mm/min; ISO 527
Tensile Strength, Yield	49.0 MPa	7110 psi	Type I, 50 mm/min; ASTM D638
	55.0 MPa	7980 psi	50 mm/min; ISO 527
Elongation at Break	>= 150 %	>= 150 %	50 mm/min; ISO 527
	150 %	150 %	Type I, 50 mm/min; ASTM D638
Elongation at Yield	5.0 %	5.0 %	50 mm/min; ISO 527
	5.0 %	5.0 %	Type I, 50 mm/min; ASTM D638
Tensile Modulus	1.84 GPa	267 ksi	50 mm/min; ASTM D638
	1.90 GPa	276 ksi	1 mm/min; ISO 527
Flexural Strength	71.0 MPa	10300 psi	break, 2 mm/min; ISO 178
Flexural Yield Strength	83.0 MPa	12000 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus	1.94 GPa	281 ksi	1.3 mm/min, 50 mm span; ASTM D790
	2.00 GPa	290 ksi	2 mm/min; ISO 178
Izod Impact, Notched	6.60 J/cm	12.4 ft-lb/in	ASTM D256
	0.560 J/cm @Temperature -30.0 °C	1.05 ft-lb/in @Temperature -22.0 °F	ASTM D256
Izod Impact, Notched (ISO)	10.0 kJ/m²	4.76 ft-lb/in²	80104; ISO 180/1A
	5.00 kJ/m² @Temperature -10.0 °C	2.38 ft-lb/in² @Temperature 14.0 °F	80104; ISO 180/1A
	7.00 kJ/m² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F	80104; ISO 180/1A
Charpy Impact, Notched	1.10 J/cm²	5.23 ft-lb/in²	Edgew 80104 sp=62mm; ISO 179/1eA
Dart Drop, Total Energy	95.0 J @Temperature 23.0 °C	70.1 ft-lb @Temperature 73.4 °F	ASTM D3763

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	85.0 µm/m-°C @Temperature 23.0 - 60.0 °C	47.2 µin/in-°F @Temperature 73.4 - 140 °F	ISO 11359-2
	115 µm/m-°C @Temperature -40.0 - 40.0 °C	63.9 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E 831
CTE, linear, Transverse to Flow	85.0 µm/m-°C @Temperature 23.0 - 60.0 °C	47.2 µin/in-°F @Temperature 73.4 - 140 °F	ISO 11359-2
	105 µm/m-°C @Temperature -40.0 - 40.0 °C	58.3 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E 831
Deflection Temperature at 0.46 MPa (66 psi)	102 °C @Thickness 3.20 mm	216 °F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	90.0 °C	194 °F	Edgew 120104 sp=100mm; ISO 75/Ae
	92.0 °C	198 °F	Flatw 80104 sp=64mm; ISO 75/Af
	88.0 °C @Thickness 3.20 mm	190 °F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	106 °C	223 °F	Rate B/120; ISO 306
	107 °C	225 °F	Rate B/50; ISO 306
	108 °C	226 °F	Rate B/50; ASTM D1525
Flammability, UL94	V-2 @Thickness 3.00 mm	V-2 @Thickness 0.118 in	UL 94

Optical Properties	Metric	English	Comments
Haze	2.0 % @Thickness 2.54 mm	2.0 % @Thickness 0.100 in	ASTM D1003
Transmission, Visible	88 %	88 %	2.54 mm; ASTM D1003

关键词:
PET
供应
SABIC Innovative Plastics XYLEX X7300CL PC+POLYESTER (Europe-Africa-Middle East)