- 密度 [g/cm3]: 1.48
- 吸水率 [%]: 0.05
- 缺口冲击强度: 1.1
- 断裂伸长率 [%]: 123
- 弯曲强度 [MPa]: 84.0
- 弯曲模量 [MPa]: 5.20
- 热变形温度 [℃]: 220.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.48 g/cc | 0.0535 lb/in³ | ASTM D792 |
Water Absorption | 0.050 % | 0.050 % | ASTM D570 |
Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | |
Linear Mold Shrinkage, Transverse | 0.012 cm/cm | 0.012 in/in | |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell M | 95 | 95 | ASTM D785 |
Tensile Strength, Ultimate | 84.0 MPa | 12200 psi | ASTM D638 |
Elongation at Break | 3.0 % | 3.0 % | ASTM D638 |
Flexural Yield Strength | 123 MPa | 17800 psi | ASTM D790 |
Flexural Modulus | 5.20 GPa | 754 ksi | ASTM D790 |
Compressive Yield Strength | 93.0 MPa | 13500 psi | ASTM D695 |
Izod Impact, Notched | 1.10 J/cm | 2.06 ft-lb/in | ASTM D256 |
Taber Abrasion, mg/1000 Cycles | 28 | 28 | ASTM D1044 |
Electrical Properties | Metric | English | Comments |
Electrical Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
Dielectric Strength | 25.0 kV/mm @Thickness 2.00 mm | 635 kV/in @Thickness 0.0787 in | ASTM D149 |
Arc Resistance | 126 sec | 126 sec | ASTM D495 |
Comparative Tracking Index | 250 V | 250 V | IEC test |
Thermal Properties | Metric | English | Comments |
Melting Point | 255 °C | 491 °F | DSC |
Deflection Temperature at 0.46 MPa (66 psi) | 220 °C | 428 °F | ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 195 °C | 383 °F | ASTM D648 |
Flammability, UL94 | HB | HB |