Overview of materials for Linear Low Density Polyethylene (LLDPE), Blow Molding Grade

Overview of materials for Linear Low Density Polyethylene (LLDPE), Blow Molding Grade 物性表: Overview of materials for Linear Low Density Polyethylene (LLDPE), Blow Molding Grade物性表及特性介绍,Overview of materials for Linear Low Density Polyethylene (LLDPE), Blow Molding Grade注塑参数详情,如需Overview of materials for Linear Low Density Polyethylene (LLDPE), Blow Molding Grade下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 0.5
  • 密度 [g/cm3]: 0.912
 
Physical PropertiesMetricEnglishComments
Density 0.912 - 1.86 g/cc0.0329 - 0.0672 lb/in³Average value: 0.993 g/cc Grade Count:32
Particle Size 1.50 - 2.50 µm1.50 - 2.50 µmAverage value: 1.83 µm Grade Count:3
Thickness 20.3 - 31.8 microns0.800 - 1.25 milAverage value: 24.8 microns Grade Count:23
Melt Flow 0.500 - 55.0 g/10 min0.500 - 55.0 g/10 minAverage value: 3.58 g/10 min Grade Count:32
Antiblock Level 2500 - 5000 ppm2500 - 5000 ppmAverage value: 4000 ppm Grade Count:6
Slip Level 450 - 1000 ppm450 - 1000 ppmAverage value: 750 ppm Grade Count:5
 
Mechanical PropertiesMetricEnglishComments
Film Tensile Strength at Yield, MD 8.27 - 13.0 MPa1200 - 1890 psiAverage value: 9.88 MPa Grade Count:24
Film Tensile Strength at Yield, TD 7.00 - 15.0 MPa1020 - 2180 psiAverage value: 9.73 MPa Grade Count:24
Film Elongation at Break, MD 470 - 680 %470 - 680 %Average value: 551 % Grade Count:28
Film Elongation at Break, TD 520 - 840 %520 - 840 %Average value: 694 % Grade Count:28
Secant Modulus 0.170 - 0.240 GPa24.7 - 34.8 ksiAverage value: 0.204 GPa Grade Count:3
Secant Modulus, MD 0.101 - 0.241 GPa14.7 - 34.9 ksiAverage value: 0.166 GPa Grade Count:23
Secant Modulus, TD 0.124 - 0.333 GPa18.0 - 48.3 ksiAverage value: 0.183 GPa Grade Count:23
Puncture Energy 1.59 - 4.41 J1.17 - 3.25 ft-lbAverage value: 3.22 J Grade Count:15
Coefficient of Friction 0.220 - 0.8000.220 - 0.800Average value: 0.530 Grade Count:3
Elmendorf Tear Strength MD 80.0 - 550 g80.0 - 550 gAverage value: 235 g Grade Count:11
Elmendorf Tear Strength TD 400 - 890 g400 - 890 gAverage value: 535 g Grade Count:11
Elmendorf Tear Strength, MD 6.30 - 27.0 g/micron160 - 686 g/milAverage value: 11.1 g/micron Grade Count:18
Elmendorf Tear Strength, TD 16.0 - 31.0 g/micron406 - 787 g/milAverage value: 20.1 g/micron Grade Count:18
Dart Drop 5.51 - 55.0 g/micron140 - 1400 g/milAverage value: 18.3 g/micron Grade Count:18
Dart drop Test 70.0 - 290 g0.154 - 0.639 lbAverage value: 138 g Grade Count:14
Film Tensile Strength at Break, MD 30.0 - 75.8 MPa4350 - 11000 psiAverage value: 52.1 MPa Grade Count:28
Film Tensile Strength at Break, TD 20.0 - 65.5 MPa2900 - 9500 psiAverage value: 39.8 MPa Grade Count:28
 
Thermal PropertiesMetricEnglishComments
Melting Point 114 - 127 °C237 - 260 °FAverage value: 119 °C Grade Count:22
 
Optical PropertiesMetricEnglishComments
Haze 1.40 - 42.0 %1.40 - 42.0 %Average value: 14.9 % Grade Count:26
Gloss 11.0 - 95.0 %11.0 - 95.0 %Average value: 44.6 % Grade Count:22
 
Processing PropertiesMetricEnglishComments
Moisture Content 0.100 %0.100 %Average value: 0.100 % Grade Count:3

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39770.html

免责声明: 本文 Overview of materials for Linear Low Density Polyethylene (LLDPE), Blow Molding Grade 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4