塑胶原料之家
  1. 首页
  2. 英文物性
  3. LLDPE
  4. Braskem Green PE SLL318 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethylene

Braskem Green PE SLL318 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethylene

Braskem Green PE SLL318 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethylene 物性表: Braskem Green PE SLL318 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethylene物性表及特性介绍,Braskem Green PE SLL318 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethylene注塑参数详情,如需Braskem Green PE SLL318 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethylene下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 2.7
 
Physical PropertiesMetricEnglishComments
Specific Gravity 0.918 g/cc0.918 g/ccASTM D1505/D792
Thickness 25.0 microns0.984 mil
Melt Flow 2.7 g/10 min
@Load 2.16 kg,
Temperature 190 °C		2.7 g/10 min
@Load 4.76 lb,
Temperature 374 °F		ASTM D1238
 
Mechanical PropertiesMetricEnglishComments
Film Elongation at Break, MD 1220 %1220 %ASTM D882
Film Elongation at Break, TD 1440 %1440 %ASTM D882
Elmendorf Tear Strength MD 120 g120 ggF; ASTM D1922
Elmendorf Tear Strength TD 340 g340 ggF; ASTM D1922
Dart drop Test 90.0 g0.198 lbg/F50; ASTM D1709
Film Tensile Strength at Break, MD 30.0 MPa4350 psiASTM D882
Film Tensile Strength at Break, TD 30.0 MPa4350 psiASTM D882
1% Secant Modulus, MD 180 MPa26100 psiASTM D882
1% Secant Modulus, TD 200 MPa29000 psiASTM D882
 
Optical PropertiesMetricEnglishComments
Haze 61 %61 %ASTM D1003
Gloss 19 %19 %60°; ASTM D2457

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39863.html

免责声明: 本文 Braskem Green PE SLL318 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethylene 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4