Braskem LL218 Cast Film Extrusion Linear Low Density Polyethylene物性表参数

Braskem LL218 Cast Film Extrusion Linear Low Density Polyethylene

Braskem LL218 Cast Film Extrusion Linear Low Density Polyethylene 物性表: Braskem LL218 Cast Film Extrusion Linear Low Density Polyethylene物性表及特性介绍,Braskem LL218 Cast Film Extrusion Linear Low Density Polyethylene注塑参数详情,如需Braskem LL218 Cast Film Extrusion Linear Low Density Polyethylene下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 2.3

Physical Properties	Metric	English	Comments

Specific Gravity	0.918 g/cc	0.918 g/cc	ASTM D1505/D792
Thickness	25.0 microns	0.984 mil
Melt Flow	2.3 g/10 min @Load 2.16 kg, Temperature 190 °C	2.3 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Elongation at Break, MD	1310 %	1310 %	ASTM D882
Film Elongation at Break, TD	1560 %	1560 %	ASTM D882
Elmendorf Tear Strength MD	150 g	150 g	gF; ASTM D1922
Elmendorf Tear Strength TD	190 g	190 g	gF; ASTM D1922
Dart drop Test	100 g	0.221 lb	g/F50; ASTM D1709
Film Tensile Strength at Break, MD	40.0 MPa	5800 psi	ASTM D882
Film Tensile Strength at Break, TD	30.0 MPa	4350 psi	ASTM D882
1% Secant Modulus, MD	200 MPa	29000 psi	ASTM D882
1% Secant Modulus, TD	230 MPa	33400 psi	ASTM D882

Optical Properties	Metric	English	Comments
Haze	54 % @Thickness 0.0250 mm	54 % @Thickness 0.000984 in	ASTM D1003
Gloss	24 % @Thickness 0.0250 mm	24 % @Thickness 0.000984 in	60°; ASTM D2457

关键词:
供应
LLDPE
Braskem LL218 Cast Film Extrusion Linear Low Density Polyethylene

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39897.html

免责声明: 本文 Braskem LL218 Cast Film Extrusion Linear Low Density Polyethylene 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息