- 熔体流动速率 [g/10min]: 7.5
- 密度 [g/cm3]: 0.903
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 0.903 g/cc | 0.0326 lb/in³ | ASTM D792 | ||
| Melt Flow | 7.5 g/10 min @Load 2.16 kg, Temperature 190 °C | 7.5 g/10 min @Load 4.76 lb, Temperature 374 °F | ASTM D1238 | ||
| Neck In | 12.7 cm | 5.00 in | at 280°C, 1.0 mil | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 97.2 °C | 207 °F | ASTM D3218 | ||
| Optical Properties | Metric | English | Comments | ||
| Haze | 1.5 % | 1.5 % | ASTM D1003 | ||
| Gloss | 94 % | 94 % | at 45°; ASTM D2457 | ||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 88.9 °C | 192 °F | Seal Initiation Temp | ||
| Feed Temperature | <= 149 °C | <= 300 °F | |||
| Melt Temperature | 182 - 199 °C | 360 - 390 °F | |||
| 302 °C | 575 °F | Suggested for extrusion coating only | |||
| Blow-up Ratio (BUR) | 2.0 - 3.0 | 2.0 - 3.0 | |||
| Descriptive Properties | |||||
| Adhesion to PP Films | 0.98 | at 280°C | |||
| Form | Pellets | ||||
Materials flagged as discontinued () are no longer part of the manufacturer’s standard product line according to our latest information. These materials may be available by special order, in distribution inventory, or reinstated as an active product. Data sheets from materials that are no longer available remain in MatWeb to assist users in finding replacement materials.
Users of our Advanced Search (registration required) may exclude discontinued materials from search results.