- 断裂伸长率 [%]: 29.0
- 弯曲模量 [MPa]: 0.7419
Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 0.954 g/cc | 0.954 g/cc | ASTM D792 |
Water Absorption | <= 0.010 % | <= 0.010 % | Immersion, 24hr; ASTM D570(2) |
Water Absorption at Saturation | <= 0.010 % | <= 0.010 % | Immersion; ASTM D570(2) |
Mechanical Properties | Metric | English | Comments |
Hardness, Shore D | 64 | 64 | ASTM D2240 |
Tensile Strength | 42.1 MPa | 6100 psi | ASTM D638 |
Elongation at Break | 380 % | 380 % | ASTM D638 |
Tensile Modulus | 0.552 GPa | 80.0 ksi | ASTM D638 |
Flexural Yield Strength | 29.0 MPa | 4200 psi | ASTM D790 |
Flexural Modulus | 0.7419 GPa | 107.6 ksi | ASTM D790 |
Compressive Strength | 20.7 MPa | 3000 psi | 10% Def.; ASTM D695 |
Compressive Modulus | 0.621 GPa | 90.0 ksi | ASTM D695 |
Izod Impact, Notched | NB | NB | ASTM D256 Type A |
Coefficient of Friction | 0.13 | 0.13 | Dry vs. Steel; QTM55007 |
Sand Slurry | 11 | 11 | 1018 Steel = 100; ASTM D4020 |
Electrical Properties | Metric | English | Comments |
Surface Resistivity per Square | >= 1.00e+14 ohm | >= 1.00e+14 ohm | ASTM D257 |
Thermal Properties | Metric | English | Comments |
CTE, linear | 198 µm/m-°C | 110 µin/in-°F | ASTM E831 |
Melting Point | 135 °C | 275 °F | Crystalline, Peak; ASTM D3418 |
Maximum Service Temperature, Air | 82.2 °C | 180 °F | Long Term |
Deflection Temperature at 1.8 MPa (264 psi) | 46.7 °C | 116 °F | ASTM D648 |
Flammability, UL94 | HB | HB | 1/8 inch (Estimated Rating) |
Compliance Properties | Metric | English | Comments |
FDA | Yes | Yes | |
USP Class VI | No | No | |
Chemical Resistance Properties | Metric | English | Comments |
Acids, Strong (pH 1-3) | Limited | Limited | |
Acids, Weak | Acceptable | Acceptable | |
Alcohols | Acceptable | Acceptable | |
Alkalies, Strong (pH 11-14) | Acceptable | Acceptable | |
Alkalies, Weak | Acceptable | Acceptable | |
Chlorinated Solvents | Acceptable | Acceptable | |
Conductive / Static Dissipative | No | No | |
Continuous Sunlight | Limited | Limited | |
Hot Water / Steam | Limited | Limited | |
Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
Hydrocarbons - Aromatic | Unacceptable | Unacceptable | |
Inorganic Salt Solutions | Acceptable | Acceptable | |
Ketones, Esters | Limited | Limited |