- 缺口冲击强度: 0.534
- 弯曲强度 [MPa]: 5.78
- 弯曲模量 [MPa]: 1.97
- 热变形温度 [℃]: 76.7
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 11.0 g/cc | 11.0 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0060 - 0.010 cm/cm | 0.0060 - 0.010 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 5.78 MPa | 839 psi | ASTM D638 |
| Elongation at Break | 3.5 % | 3.5 % | ASTM D638 |
| Tensile Modulus | 2.348 GPa | 340.6 ksi | ASTM D638 |
| Flexural Strength | 14.2 MPa | 2060 psi | ASTM D790 |
| Flexural Modulus | 1.97 GPa | 286 ksi | ASTM D790 |
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Surface Resistivity per Square | 0.20 ohm | 0.20 ohm | ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 76.7 °C | 170 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 65.6 °C | 150 °F | ASTM D648 |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 177 - 227 °C | 350 - 440 °F | |
| Mold Temperature | 21.1 - 65.6 °C | 70.0 - 150 °F | |