Polimeri Europa Eraclene® MR 80 High Density Polyethylene

Polimeri Europa Eraclene® MR 80 High Density Polyethylene - Injection Molding

Polimeri Europa Eraclene® MR 80 High Density Polyethylene - Injection Molding 物性表: Polimeri Europa Eraclene® MR 80 High Density Polyethylene - Injection Molding物性表及特性介绍,Polimeri Europa Eraclene® MR 80 High Density Polyethylene - Injection Molding注塑参数详情,如需Polimeri Europa Eraclene® MR 80 High Density Polyethylene - Injection Molding下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 18.0
缺口冲击强度: 0.45
拉伸强度 [MPa]: 27.0
弯曲模量 [MPa]: 1.25
脆化温度 [℃]: -60.0

Physical Properties	Metric	English	Comments

Specific Gravity	0.954 g/cc	0.954 g/cc	ISO 1183
Melt Flow	18 g/10 min @Load 2.16 kg, Temperature 190 °C	18 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	65	65	ISO 868/A
Tensile Strength at Break	14.0 MPa	2030 psi	ISO 527
Tensile Strength, Yield	27.0 MPa	3920 psi	ISO 527
Elongation at Break	200 %	200 %	ISO 527
Flexural Modulus	1.25 GPa	181 ksi	ISO 178
Izod Impact, Notched	0.450 J/cm	0.843 ft-lb/in	ISO 180/A

Thermal Properties	Metric	English	Comments
Melting Point	135 °C	275 °F	Internal method
Vicat Softening Point	126 °C @Load 1.00 kg	259 °F @Load 2.20 lb	ISO 306/A
Brittleness Temperature	<= -60.0 °C	<= -76.0 °F	ASTM D746

关键词:
HDPE
供应
Polimeri Europa Eraclene® MR 80 High Density Polyethylene - Injection Molding

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-42378.html

免责声明: 本文 Polimeri Europa Eraclene® MR 80 High Density Polyethylene - Injection Molding 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息