- 熔体流动速率 [g/10min]: 1.5
- 密度 [g/cm3]: 0.935
- 缺口冲击强度: 5.6
- 拉伸强度 [MPa]: 18.6
- 弯曲模量 [MPa]: 0.750
- 热变形温度 [℃]: 58.0
- 脆化温度 [℃]: -75.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.935 g/cc | 0.0338 lb/in³ | ASTM D4883 |
Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 190 °C | 1.5 g/10 min @Load 4.76 lb, Temperature 374 °F | ASTM D1238 |
Mechanical Properties | Metric | English | Comments |
Hardness, Shore D | 61 | 61 | ASTM D2240 |
Tensile Strength, Yield | 18.6 MPa | 2700 psi | ASTM D638 |
Elongation at Break | 950 % | 950 % | ASTM D638 |
Flexural Modulus | 0.750 GPa | 109 ksi | Tangent-Method 1; ASTM D790 |
Izod Impact, Notched | 5.60 J/cm | 10.5 ft-lb/in | ASTM D256 |
Tensile Impact Strength | 353 kJ/m² | 168 ft-lb/in² | ASTM D1822 |
Thermal Properties | Metric | English | Comments |
Deflection Temperature at 0.46 MPa (66 psi) | 58.0 °C | 136 °F | ASTM D648 |
Vicat Softening Point | 120 °C | 248 °F | ASTM D1525 |
Brittleness Temperature | <= -75.0 °C | <= -103 °F | ASTM D746 |
- 关键词:
- 供应
- MDPE
- Ineos B35-150-134 MDPE